USER’S MANUAL 802.11a/b/g/n 2Tx2R + BT5.
PRODUCT FEATURES BT FEATURE: Bluetooth V5.0 system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and 4.
PRODUCT SPECIFICATIONS MAIN CHIPSET MediaTek MT7638BU FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V5.0LE Bus Interface USB2.0 Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power +4 ≤ Output Power ≤ +10dBm; Class I Device Receiver Sensitivity < 0.1% BER at -88dBm Wi-Fi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB2.0 Data Rate 802.
21: USA 19: EU 8: Japan 802.11bg 2.400 ~ 2.4835 GHz 802.11a 5.15 ~ 5.85 GHz CCK < 35% OFDM < -25dB MCS0(HT20/40MHz) < -5dB MCS7(HT20/40MHz) < -28dB MCS0(VHT20/40/80MHz) < -5dB MCS7(VHT 20/40/80MHz) < -27dB MCS8(VHT 20/40/80MHz) < -30dB MCS9(VHT 20/40/80MHz) < -32dB 2.4&5GHz -20ppm < Center Frequency < +20ppm Frequency Range EVM Frequency Offset Transmit Output Power - single chain @ant; Tolerance: ±1.5dBm@2.4GHz; ±2dBm@5GHz 2.4GHz 802.11b Tgtpwr (dBm) 1Mbps 16 2Mbps 16 5.5Mbps 16 11Mbps 16 802.
802.11n HT40 Tgtpwr (dBm) MCS0 MCS1 MCS2 MCS3 MCS4 13 MCS5 13 MCS6 13 MCS7 13 MCS8 13 MCS9 13 13 13 Receiver Sensitivity Frequency Band 2.
RECOMMENDED OPERATION CONDITIONS Symbol Rating Min Typ Max Units VDD33 3.3V Supply Voltage 2.97 3.3 3.63 V VDD12 1.2V Supply Voltage 1.14 1.2 1.26 V VDD15 1.5V Supply Voltage 1.425 1.5 1.575 V Min Typ Max Units DC CHARACTERISTICS Symbol Parameter VIL Input Low Voltage -0.28 - 0.6 V VIH Input High Voltage 2.0 - 3.63 V VOL Output Low Voltage -0.28 - 0.4 VOH Output High Voltage 2.4 - 3.
PIN ASSIGMENT Pin. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin Define Description +3.3V 3.3V source +3.3V 3.
MECHANICAL Page 8/13
EEPROM INFORMATION WI-FI Reg Domain World Wide 2.4G/5G Read from registry; Control by driver Offset 0x38 for 5G: 0xFF Offset 0x39 for 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This module is only FCC authorized for the specific rule parts 15.247, 15.407 listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15 Subpart B compliant. This module has been approved to operate with the antenna types listed below, with the maximum permissible gain indicated. Ant.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for