Operation Manual
14
Step 1: Connecting Antenna/Satellite Cables
Wall Outlet DVD Recorder TV
1
Use an antenna cable to connect the RF IN jack on the DVD recorder to the antenna outlet on the wall.
2
Use an antenna cable to connect the RF OUT jack on the DVD recorder to the RF IN jack on the television.
(Please note that this serves as a pass-through only.)
SCART IN (AUX/DECODER)
TUNER
AV OUTPUT
T V
Wall
RF IN
RF OUT
RF IN
TUNER
Step 2: Connecting the Video Cable
The table below lists some of the options for establishing the video and audio connections of this DVD
recorder. For reference, fi rst check the top row to select a type of video cable you wish to use; then look
down the column to see what types of audio connections are applicable. Select only one of the applicable
options to connect your DVD recorder to other devices unless specifi ed otherwise.
Video
Audio
HDMI Cable
Component
Video Cable
SCART Cable
Composite Video
Cable
HDMI Cable
*
SCART Cable
*
Composite Audio
Cable
Digital Audio Cable
(Optical)**
Digital Audio Cable
(Coaxial)**
* The HDMI and SCART cables can transmit video and audio signals at the same time. Normally, if you use these two
cables for video connection, you do not need to establish an additional analog audio connection.
** If you wish to enjoy digital audio sound, you need to establish the digital audio connection (via an optical or a coaxial
cable) whatever video cable you use.