Operation Manual

40
ShowView System Mode
1 On the Easy Guider menu, press  to select
‘Timer Record’, then press ENTER.
2 Press  to select ‘ShowView Setting’, then
press ENTER.
Select the mode to set a timer program
3 Press  to select ‘Once’, ‘Daily’ or ‘Weekly’,
then press ENTER.
4 Press number buttons (0-9) to enter the ShowView
number of a program you wish to record, then
press ENTER.
Press  to switch on or off the PDC function,
then press ENTER.
(For more details, please see ‘VPS (Video Program-
ming System) & PDC (Program Delivery Control)’
(p.41) in the note section.)
Enter ShowView number of the program
5 A ‘Preset Channel’ pop-up box will appear, if the
DVD recorder fails to fi nd information of a cor-
responding channel.
Press  to enter the channel number which
corresponds to the GCN (Guide Channel Number)
designated by the ShowView system, then press
ENTER.
EasyAccess_EasyGuider_04_05
Enter corresponding channel number
EasyAccess_EasyGuider_04_05
As the channel number of a TV station may vary
depending on where you live, you need to set up a
matching list in order to use the ShowView system
to schedule a timer program.
3 Press  to select the signal source, then press
ENTER.
If you select ‘TV’, press  to select the channel
you want to record, then press ENTER.
If you select ‘TV’, press  to switch on or off the
PDC function, then press ENTER. (For more details,
please see ‘VPS (Video Programming System) &
PDC (Program Delivery Control)’ (p.41) in the note
section.)
4 Press  to select ‘Once’, ‘Daily’ or ‘Weekly’,
then press ENTER.
Recording
Frequency
Suitable Applications
Once
To record program aired at a
specifi c date/time
Daily
To record program aired every day
at a specifi c time
Weekly
To record program aired on certain
day(s) every week at a specfi c
time
5 Press  or number buttons (0-9) to enter
the date, then press ENTER.
You can set the date up to 2099/12/31 (Year/Month/
Day)
6 Press  or number buttons (0-9) to enter
the Start time, then press ENTER.
7 Press  or number buttons (0-9) to enter
the End time, then press ENTER.
8 Press  to select ‘DVD’ or ‘HDD’ as the target
medium to save the recording , then press
ENTER.
9 Press  to select a recording mode, then press
ENTER.
10 If your signal source is set to ‘TV’, press  to
select a TV audio mode, then press ENTER.
11 Summary of the timer program will appear.
Press  to select ‘Back’ to modify the setting.
Or press ENTER to save the setting and exit the
screen.
To modify the settings, select ‘Back’
Summary