Datasheet

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PART NO.: LSHD-5503 PAGE: 4 of 5
BNS-OD-C131/A4
ABSOLUTE MAXIMUM RATING AT Ta = 25
o
C
PARAMETER MAXIMUM RATING UNIT
Power Dissipation Per Segment 70 mW
Peak Forward Current Per Segment
( Frequency 1Khz, 15% duty cycle)
90 mA
Continuous Forward Current Per Segment 25 mA
Forward Current Derating from 25
0
C 0.28 mA/
0
C
Operating Temperature Range -35
0
C to +105
0
C
Storage Temperature Range -35
0
C to +105
0
C
Soldering Conditions : 1/16 inch below seating plane for 5 seconds at 260
0
C
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25
o
C
PARAMETER SYMBOL MIN TYP MAX UNIT
TEST
CONDITION
320
Average Luminous Intensity Per Segment I V
5400
1300
17000
µcd
I F = 1mA
I F = 10mA
Peak Emission Wavelength λp 632 nm I F = 20mA
Spectral Line Half-Width
∆λ
20 nm I F = 20mA
Dominant Wavelength λd 624 nm I F = 20mA
Forward Voltage Per Segment V F 2.1 2.6 V I F = 20mA
Reverse Current Per Segment I R 100 µA V R = 5V
Luminous Intensity Matching Ratio I V -m 2 : 1 I F = 1mA
Note: 1.Luminous Intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
2.
Reverse voltage is only for IR test. It can not continue to operate at this situation.