LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only SMD LAMP LED OFFICE : 90 Chien I Road, Chung Ho Taipei, Taiwan, R.O.C. TEL : +886-2-2222-6181 FAX : +886-2-2226-5872 LTW-Z5630SZL57 DATASHEET DATE : 2012/08/08 REV. NO.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * * * * * * Package in 8mm tape on 7" diameter reels. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. Meet green product and Pb-free(According to RoHS) Package Dimensions Part No. Lens Color Source Color LTW-Z5630SZL57 Orange InGaN Blue Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.2 mm (.008") unless otherwise noted.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ℃ Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Rating Unit Power Dissipation Po 576 mW Continuous Forward Current IF 150 mA Operating Temperature Range Topr -40 ~ +80 °C Storage Temperature Range Tstg -40 ~ +100 °C Tj ≦115 °C Junction Temperature Note: 1/10 duty cycle, Pulse width ≤100µs. Forbid to operating at reverse voltage condition for long.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electro-Optical Characteristics at Ta=25°C Parameter Forward Voltage Luminous Flux 1 Values Symbol VF Φv Min 3.0 Typ. 3.2 Max. 3.6 Min 33.5 Typ. 42.0 Max. 50.5 Test Condition Unit IF = 120mA V IF = 120mA lm Reverse Current IR Max. 100 VR = 5V µA Viewing Angle 2θ1/2 Typ. 120 IF = 120mA ° x Typ. 0.329 y Typ. 0.342 Optical Efficiency ηopt Typ. 109 IF = 120mA lm/W Correlated Color Temperature CCT Typ.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Bin Code List VF (in parallel) Spec. Table VF Bin Forward Voltage (volts) at IF = 120mA Min Max V1 3.0 3.1 V2 3.1 3.2 V3 3.2 3.3 V4 3.3 3.4 V5 3.4 3.5 V6 3.5 3.6 Tolerance on each Forward Voltage bin is +/- 0.1V Φ v Luminous Flux Spec. Table Φ v Bin Lumen (lm) at IF = 120mA Min Max R1 33.5 38.5 R2 38.5 44.0 R3 44.0 50.5 Tolerance on each Luminous Flux bin is +/- 7.5%. Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Color bin limits at IF = 120mA Hue Bin V1 V2 V3 V4 V5 V6 CIE 1931Chromaticity coordinates x 0.3319 0.3320 0.3376 0.3371 y 0.3446 0.3565 0.3616 0.3493 x 0.3318 0.3319 0.3371 0.3366 y 0.3327 0.3446 0.3493 0.3369 x 0.3267 0.3263 0.3320 0.3319 y 0.3399 0.3513 0.3565 0.3446 x 0.3270 0.3267 0.3319 0.3318 y 0.3285 0.3399 0.3446 0.3327 x 0.3215 0.3207 0.3263 0.3267 y 0.3353 0.3462 0.3513 0.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25°° C Ambient Temperature Unless Otherwise Noted) 180 Forward Current (mA) 170 160 150 140 130 120 110 100 2.0 Fig.1 Typical Spectrum 2.5 3.0 3.5 4.0 Forward Voltage (V) 160% 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Relative Luminous Intensity Normalized at 90mA Relative Lumen Intensity Fig.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape Forward Current (mA) 200 160 120 80 40 0 0 20 40 60 80 100 Ambient Temperature Ta (C) Fig.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-1000 pieces per reel. 3. Minimum packing quantity is 500 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 8. Others The appearance and specifications of the product may be modified for improvement without prior notice. 9. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Rename item list Version Page A - Content of Change Official 5630 Spec for lighting application (5700K) Date Record 08/08, 2012
