User's Manual

Page 9/10 LITE-ON
(Note, the system image is basing on QCA SDK indicated. Further SDK version changes
maintained in software document separately)
4. RF capability
4.1 Transmite power (Single chain)
The table below shows the design target for maximum transmit power per chain @ the
different data rates.
Table-02 product Transmit power (single chain)
Maximum Transmit Power (per chain)  2 dBm
2.4GHz 5GHz
11 g (6Mbps) 19 -
11 g (54Mbps) 15 -
11 a (6Mbps) - 18
11 a (54Mbps) - 14
HT20(MCS 0/8) 19 18
HT20(MCS 7/15) 15 14
HT40(MCS 0/8) 18 17
HT40(MCS 7/15) 14 13
VHT80 256QAM @ 3/4 Code Rate - 13
VHT80 256QAM @ 5/6 Code Rate - 12
4.2 Rx Sensitivity (Single chain)
The table below shows the design target for minimum receive sensitivity per chain @ the
different data rates. The value might be modified after each build if varried, like
EVT,DVT,PVT etc.
Table-03 product Receive Sensitivity (single chain)
Receive Sensitivity (per chain)  2 dBm
2.4GHz 5GHz
11 g (6Mbps) -89 -
11 g (54Mbps) -73 -
11 a (6Mbps) - -89
11 a (54Mbps) - -72
HT20(MCS 0/8) -89 -89
HT20(MCS 7/15) -69 -69
HT40(MCS 0/8) -85 -85
HT40(MCS 7/15) -66 -66
VHT20 256QAM @ 3/4 Code Rate - -64