User's Manual

LITEMAX Electronics Inc. Page 31
6.2
OSD Menu
Here are some instructions for you to use the OSD (On Screen Display). By pressing the “menu”,
you will see the below picture.
Timing shows resolution and V-frequency of the panel. This 2 information is not changeable by
user.
There are 7 sub menus within the OSD user interface:
Brightness, Signal Select, Sound, Color, Image, Tools, and Exit.
When you press the “menu” button, you enter the “Brightness” sub directory. In this directory, you will
see 4 selections:
press “menu” once, you can go into the Ambient light sensor.
Ambient light sensor:
press this Icon,must to accompany with Litemax ambient light sensor to auto
dimming.(OPTION)
OSD Brightness：
Press the “menu” once, to adjust the brightness. Press “left” to dim down the brightness to “0”, press
“right” to increase the brightness to “100”
Contrast：
Press “Menu” once, you can adjust the contrast from “0” to “100” by pressing the “Left” and “Right”.
Exit:
back to the beginning menu.