User Guide

Input Power Cord Installation
Choosing Conduit
Choose the appropriate conduit in
accordance with all the applicable state, local,
and national electrical codes, and standards.
Attaching Compression Lugs
Please adhere to standard processes to
properly heat shrink the tubing on the
compression lug to ensure a secure fitment
on the wire before connecting to the terminal
blocks in the station.
Refer to the following wire specification. Use
a conductor type other than RHH, RHW, and
RHW-2 with outer covering.
Choose the appropriate conductors in
accordance with all applicable, state, local,
and national electric codes and standards.
Model Terminal Rating
Lucid Connected
Home Charging
Station
L1, L2 90 º
Copper
wire
G
Electrical Wiring
Electrical wiring to the charging station.
1. Fold the wire end to pass through the
conduit, and insert it into the input hole.
Choose input direction 1, 2, or 3, and
open the cap.
2. Loosen the plastic screw, and open the
insulation sheet on the terminal block.
Installation
11