Manualshelf

Installation Sheet

ManualsBrandsLitetronics ManualsOtherLitetronics Volumetric Single Light 47" Wide Integrated LED Retrofit Troffer with 4000K Color Temperature
12345678910
4
LED VOLUMETRIC RETROFIT
INSTALLATION
Section 1
Mated Position-rotated
Open/Install Position
1. Ensure that the rotating mounting cams (2) on the
frame are in the open or install position.
Carefully remove Volumetric Retrofit, Frame and Driver from the packaging. Disassemble the Volumetric from the frame by rotating the
panel hooks on the Volumetric to release from the frame. Inspect product for defects due to shipping.
Turn off the power to the fixture from the circuit breaker. Remove the original lens/diffuser and set aside. Then disconnect the ballast
wires from the incoming line.
Product Preparation
Troffer Preparation
READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
NOTE: Do not attempt to use a 2’x2’ frame assembly to retrofit a 2’x4’ ceiling space.
Mounting the frame to T-Grid underneath the troffer: