ITEM #1055731 FLUSHMOUNT CEILING FIXTURE MODEL #CL18BZW Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
PACKAGE CONTENTS PART A B C D E F G H DESCRIPTION Fixture Glass Shade Mounting Strap Threaded Rod Rubber Washer (preassembled to Threaded Rod (D)) Flat Washer (preassembled to Threaded Rod (D)) Hex Nut (preassembled to Threaded Rod (D)) Finial (preassembled to Threaded Rod (D)) C QUANTITY 1 1 1 1 1 1 A B 1 1 D F E G H HARDWARE CONTENTS (shown actual size) AA Wire Connector BB CC Machine Screw Qty. 3 Qty. 2 Fixture Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS.
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Insert fixture screws (CC) two full turns into desired screw holes on the mounting strap (C). 3 C Hardware Used CC Fixture Screw x2 CC CC 4. Attach mounting strap (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
ASSEMBLY INSTRUCTIONS 5. Unwrap BARE fixture wire from BLACK and WHITE fixture wires. Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 7. Carefully arrange excess wiring and wire connectors (AA) within outlet box. 7 Outlet Box AA Align keyhole slots on fixture (A) with fixture screws (CC) on mounting strap (C) and push up. Turn fixture (A) clockwise until it no longer turns. Secure fixture (A) to mounting strap (C) by tightening the fixture screws (CC). C CC CC Hardware Used A AA Wire Connector x3 CC Fixture Screw x2 8. Install three standard-base bulbs (not included). Use either 60-watt max.
ASSEMBLY INSTRUCTIONS 10. Attach threaded rod (D) to rod in center of fixture (A). 10 A Rod D 11. Align hole in glass shade (B) with threaded rod (D) and push up gently on glass shade (B) until it touches fixture (A). Re-attach rubber washer (E) and flat washer (F) on threaded rod (D). Secure glass shade (B) with hex nut (G) previously removed (Step 9, page 7), then finial (H). 11 A B WARNING: Do not overtighten hex nut (G) or finial (H) as glass may crack or break. D E G H 12.
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb(s) will not light. POSSIBLE CAUSE 1. Bulb(s) is/are burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb(s). 2. Make sure power supply is ON. 3. Check wiring and all connections.
