ITEM #0728837 WALL SCONCE FITTER MODEL #WS341-1BRZ ITEM #0728836 #0728835 #0728834 VANITY BAR FITTER MODEL #VB341-2BRZ VB341-3BRZ VB341-4BRZ Français p. 9 Español p. 17 MODEL #WS341-1BRZ MODEL #VB341-2BRZ MODEL #VB341-3BRZ MODEL #VB341-4BRZ ATTACH YOUR RECEIPT HERE Purchase Date E342246 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
PACKAGE CONTENTS PART A B C D E F #0728837 #0728836 #0728835 #0728834 QUANTITY QUANTITY QUANTITY QUANTITY 1 1 1 1 1 1 1 1 DESCRIPTION Fixture Mounting Plate (preassembled) Screw (preassembled) Nut (preassembled) Decorative Nut (preassembled) Socket Ring (preassembled) 2 2 2 2 2 2 2 2 2 2 2 2 1 2 3 4 A B D C E F Drawing representational only; product may vary in appearance. HARDWARE CONTENTS (shown actual size) AA Wire Connector BB Machine Screw Qty. 3 Qty.
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Remove decorative nuts (E) from front of fixture (A) and remove mounting plate (B) from back of fixture (A). 3 B E Save decorative nuts (E) for later use. A E 4. Attach mounting plate (B) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
ASSEMBLY INSTRUCTIONS 6. Unwrap BARE wire on fixture (A) from BLACK and WHITE wires. Prepare fixture wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 8. Align holes in fixture (A) with screws (C) in mounting plate (B) and push fixture (A) toward wall. Attach fixture (A) to mounting plate (B) using the decorative nuts (E) previously removed (Step 3, page 5). 8 Outlet Box B E Note: Fixture (A) can be installed with the sockets facing either up or down. A E 9. Remove socket ring (F) from socket of fixture (A). Attach glass shade (sold separately) to socket, securing with socket ring (F).
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb will not light. POSSIBLE CAUSE 1. Bulb(s) is(are) burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb(s). 2. Make sure power supply is ON. 3. Check wiring and all connections.
