Instruction Manual

IMPORTANT SAFETY WARNING
BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT
IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
Before commencing any electrical work ensure the supply is switched OFF at the mains. Either
by switching off the consumer unit or by removing the appropriate fuse. This product should
be installed in accordance with the relevant
US National Electrical Code.
If the unit is to be used as a replacement for an existing product, remove the existing unit from its
location and disconnect the wiring. Connect the wires as shown in diagram. Ensure terminals are
ensure no wires are trapped.
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE
INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE
REFERENCE.
o Failure to follow the instructions in this guide voids all warranties on your speakers.
o Warning: Do not use the product in water.
o Warning: Do not install speaker directly above any heat sources such as radiators, or other
apparatus that produce heat.
o Protect the power cable from being damaged, do not over stretch cable.
o Only use attachments/accessor
o Turn off the power to the speaker when unused for long periods of time.
o Do not open the back cover to the speaker as this protects the PCB as this will invalidate the
warranty and could cause electric shock.
o Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts or
Water lines.
