SDS

_____________________________________________________________________________________________
1296135 - 11530 BZA M4
Revision Date 04-Nov-2015
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical name ACGIH TLV OSHA PEL NIOSH IDLH
Silica
7631-86-9
- TWA: 20 mppcf
: (80)/(% SiO2) mg/m
3
TWA
IDLH: 3000 mg/m
3
TWA: 6 mg/m
3
Copper
7440-50-8
TWA: 0.2 mg/m
3
fume TWA: 1 mg/m
3
Cu dust and mist
TWA: 0.1 mg/m
3
fume
TWA: 1 mg/m
3
dust and mist
(vacated) TWA: 0.1 mg/m
3
Cu dust,
fume, mist
IDLH: 100 mg/m
3
dust, fume and mist
TWA: 1 mg/m
3
dust and mist
TWA: 0.1 mg/m
3
fume
Tin
7440-31-5
TWA: 2 mg/m
3
TWA: 2 mg/m
3
Sn
except Tin hydride
TWA: 2 mg/m
3
Sn except oxides
(vacated) TWA: 2 mg/m
3
(vacated)
TWA: 2 mg/m
3
Sn except oxides
IDLH: 100 mg/m
3
TWA: 2 mg/m
3
Iron oxide
1309-37-1
TWA: 5 mg/m
3
respirable particulate
matter
TWA: 10 mg/m
3
fume
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable fraction
(vacated) TWA: 10 mg/m
3
fume and
total dust Iron oxide
(vacated) TWA: 5 mg/m
3
respirable
fraction regulated under Rouge
IDLH: 2500 mg/m
3
Fe dust and fume
TWA: 5 mg/m
3
Fe dust and fume
Vinyl acetate
108-05-4
STEL: 15 ppm
TWA: 10 ppm
(vacated) TWA: 10 ppm
(vacated) TWA: 30 mg/m
3
(vacated) STEL: 20 ppm
(vacated) STEL: 60 mg/m
3
Ceiling: 4 ppm 15 min
Ceiling: 15 mg/m
3
15 min
Aluminum
7429-90-5
TWA: 1 mg/m
3
respirable particulate
matter
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable fraction
(vacated) TWA: 15 mg/m
3
total dust
(vacated) TWA: 5 mg/m
3
respirable
fraction (vacated) TWA: 5 mg/m
3
Al
Aluminum
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Glass fiber
65997-17-3
TWA: 1 fiber/cm3 respirable fibers:
length >5 µm, aspect ratio >=3:1, as
determined by the membrane filter
method at 400-450X magnification
[4-mm objective], using phase-contrast
illumination
TWA: 5 mg/m
3
inhalable particulate
matter
-
Antimony oxide (Sb2O4)
1332-81-6
TWA: 0.5 mg/m
3
Sb TWA: 0.5 mg/m
3
Sb
(vacated) TWA: 0.5 mg/m
3
Sb
IDLH: 50 mg/m
3
Sb
TWA: 0.5 mg/m
3
Sb
Yttrium oxide (Y2O3) TWA: 1 mg/m
3
Y - IDLH: 500 mg/m
3
Y
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
In case of rupture: Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this
product. Take off contaminated clothing and wash before reuse.
Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up.
Keep out of the reach of children.
Incompatible Products
Strong acids. Strong oxidizing agents. Strong bases. Acid chlorides. Acid anhydrides.
Chloroformates. Strong reducing agents.
_____________________________________________________________________________________________
Page 5 / 14