Installation Guide

ManualsBrandsLithonia Lighting ManualsAll Lithonia LightingLithonia Lighting Ferros 1 Light Mini Pendant

To view Installation Instructions for the Ferros 5-Light Chandelier,

click here.

To view Installation Instructions for the Ferros 9-Light Chandelier,

click here.

Summary of content (5 pages)

PAGE 1
To view Installation Instructions for the Ferros 5-Light Chandelier, click here. To view Installation Instructions for the Ferros 9-Light Chandelier, click here.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS INFORMACIÓN IMPORTANTE DE SEGURIDAD IMPORTANTES MESURES DE SÉCURITÉ • Fixture cannot be used with a dimmer switch. • This fixture is designed for indoor use ONLY and should not be used in areas with limited ventilation or high ambient temperatures. • Fixture must be connected to a nominal 120Volt, 60 Hz power source. Any other connection voids warranty. • Always use the same wattage and type of lamp included or specified for the fixture. Failure to do so will void warranty.
PAGE 3
REQUIRED TOOLS FIXTURE PACKAGING LIST Description Quantity *1) Crossbar .................................................... 1 *2) Screws ....................................................... 2 *3) Wirenuts ..................................................... 3 *4) Hexnut ........................................................ 1 *5) 1-1/2" Threaded Pipe ................................. 1 *6) Canopy Loop & Nut .................................... 1 *7) Lockable Link ....................................
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS INFORMACIÓN IMPORTANTE DE SEGURIDAD IMPORTANTES MESURES DE SÉCURITÉ • Fixture can not be used with a dimmer switch. • This fixture is designed for indoor use ONLY and should not be used in areas with limited ventilation or high ambient temperatures. • Fixture must be connected to a nominal 120Volt, 60 Hz power source. Any other connection voids warranty. • Always use the same wattage and type of lamp included or specified for the fixture. Failure to do so will void warranty.
PAGE 5
FIXTURE PARTS LIST INSTALLATION Description Quantity *1) Crossbar ..................................................... 1 FIGURES *2) Screws ........................................................ 2 *3) Wirenuts ...................................................... *4) Threaded Pipe ............................................. *5) Canopy Loop & Nut ..................................... *6) Canopy ........................................................ *7) Chain .........................................