SDS

Keystone Technologies Inc.

MATERIAL SAFETY DATA SHEET – FLUORESCENT LAMPS

Fluorescent lamps manufactured for Keystone Technologies Inc. are exempted from the requirements of the

OSHA Hazard Communication Standard (29 CFR 1910.1200) because they are “articles”. The following

information is provided by Keystone Technologies Inc. as a courtesy to its customers.

I. PRODUCT INFORMATION

Product Name: T8 Linear Fluorescent Lamp

II. HAZARDOUS INGREDIENTS

THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE INTACT.

If the lamp is broken the following materials may be released:

Chemical Name CAS Number % by weight Exposure Limits In Air (mg/cubic meter)

ACGIH(TLV) OSHA (PEL)

Mercury * 7439-97-6 <0.1 0.05 0.05

Tin 7440-31-5 0-<1 2.0 2.0

Lead 7439-92-1 0-<1 0.5 0.05

Argon 7440-37-1 0-<1 ** None

Neon 7440-01-9 0-<1 ** None

Xenon 7440-63-3 0-<1 ** None

* This chemical is subject to the reporting requirements of section 313 of Title III of the Superfund

Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.

** The TLV for a simple asphyxiant is a minimal atmospheric oxygen content of 18% by volume at

atmospheric pressure.

III. PHYSICAL PROPERTIES

Not applicable to intact lamp.

IV. FIRE AND EXPLOSION HAZARD

Flammability: Non-combustible

Fire Extinguishing Materials: Use extinguishing media suitable for surrounding fire.

Special Firefighting Procedures: Use a self contained breathing apparatus to prevent inhalation dust

and/or fumes that may be generated from broken lamps during firefighting activities.

Unusual Fire and Explosion Hazards: When exposed to high temperature toxic fames may be released

from broken lamps.

PAGE 1
Keystone Technologies Inc. MATERIAL SAFETY DATA SHEET – FLUORESCENT LAMPS Fluorescent lamps manufactured for Keystone Technologies Inc. are exempted from the requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) because they are “articles”. The following information is provided by Keystone Technologies Inc. as a courtesy to its customers. I. PRODUCT INFORMATION Product Name: T8 Linear Fluorescent Lamp II.
PAGE 2
Keystone Technologies Inc. V. REACTIVITY DATA Stability: Stable. Conditions to avoid: None for intact lamps. Incompatibility (materials to avoid): None for intact lamps. Hazardous Decomposition Products: None for intact lamps. Hazardous Polymerization Products: Will not occur. VI. HEALTH HAZARDS THERE ARE NO KNOWN HEALTH HAZARDS FROM LAMPS THAT ARE INTACT. No adverse effects are expected from occasional exposure to broken lamps.
PAGE 3
Keystone Technologies Inc. VIII. SPECIAL HANDLING INFORMATION – FOR BROKEN LAMPS Ventilation: Use adequate general and local exhaust ventilation to maintain exposure levels below the PEL or TLV limits. If such ventilation is unavailable, use respirators as specified below. Respiratory Prosecution: Use appropriate NIOSH approved respirators if airborne dust. Concentrations exceed the PEL or TLV limits. All appropriate requirements set forth in 29 CFR 1910.134 should be met.