Specification Sheet

Indoor Decorative
Litepuff
Vanity
FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination for residential and commercial applications.
Ideal for use as lighting in bathroom/lavatories, over hospital beds, hallways/
corridors stairways and utility areas.
ATTRIBUTES
A distinctive contoured design complements a variety of decors. Durable
milk-white acrylic diffuser provides a widespread uniform illumination. Suit-
able for vertical or horizontal mounting. Available in 2', 3' and 4' lengths.
Utilizes linear T8 fluorescent lamps for energy efficiency, superior color
rendering and long life (not included).
Standard with electronic ballast (120 volt, 60Hz) ensures no flickering and
quiet operation without interfering with other electronics. Also available in
other ballast configurations.
For use with non-dimmable switches only.
LISTING
CUL listed to US and Canadian safety standard on Residential Electronic (RE)
ballast fixtures and suitable for damp locations. ENERGY STAR
®
qualified.
ADA compliant. For Non-RE bllast, UL and CSA (standard) for NOM Certified
see options.
WARRANTY
Guaranteed for two years against mechanical defects in manufacture.
Light Concepts Indoor Decorative - Vanity
Catalog Number
Notes Type
Linear T8 Fluorescent
Sheet #: PUFV DEC-310
Notes:
1. Lamps not included.
2. Use with non-dimmable switches only.
3. Residential electronic ballast standard and requires RE
designation.
4. No designation for lamp type is required on RE ballast fixtures.
Residential Ballast
3
RE 120 volt residential
electronic ballast
(standard)
(blank) Other voltage and
ballast types available
(see ballast/voltage)
(Consult factory for
other options)
Options
GEB Electronic ballast, <20%THD
GEB10IS T8 electronic ballast, <10%
THD, instant start
GEB10RS T8 electronic ballast, 10%
THD, rapid start
NOM NOM Certified
Others voltage and
ballast types (consult
factory)
Ballast/Voltage
4
(blank) RE ballast
fixtures only
MVOLT Multi-volt
120 120 volt
277 277 volt
347 347 volt
11890 2' - (2) 17W T8 fluorescent lamps required
11891 3' - (2) 25W T8 fluorescent lamps required
11892 4' - (2) 32W T8 fluorescent lamps required
Model Number
1,2
Example: 11892RE
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the
appropriate line. Order accessories and replacement parts as separate catalog numbers.
DIMENSION
Nominal Lamp Model Number (A) Width (B) Length (C) Extension*
Size Configuration Number of Lamps inches (cm) inches (cm) inches (cm)
2' 11890 (2) 17W linear T8 5" (12.7) 27" (68.6) 4" (10.2)
3' 11891 (2) 25W linear T8 5" (12.7) 39" (99.1) 4" (10.2)
4' 11892 (2) 32W linearT8 5" (12.7) 51" (129.5) 4" (10.2)
* Extension from wall All dimensions are in inches (centimeters)
(A)
(B)
(C)
Accessories/Replacement parts
DVANPUFF 24 24" white acrylic diffuser
DVANPUFF 36 36" white acrylic diffuse
DVANPUFF 48 48" white acrylic diffuser