Instructions / Assembly

1300 South Wolf Road, Des Plaines, IL 60018 | 847 827 9880 | www.acuitybrands.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/09/18 Page 2 of 2
CONTRACTOR SELECT IC1/TC1/TC1R
LAMP:
For IC1: A19/R14/R16/R20/PAR16/PAR20 • For TC1 and TC1R: R14/R16/R20/PAR16/PAR20
• Lamp ratings based on trim selection.
SOCKET:
For IC versions, medium base porcelain with nickel-plated copper screw shell • For TC version,
detachable medium base porcelain with nickel-plated copper screwshell.
LABELS:
UL listed for through-branch wiring, damp locations and IP • Product thermally protected
against improper use of lamps • Union made • UL Listed/CSA certied • Trims 14 and V4034
are wet location approved for covered ceiling applications, when used with outdoor rated
lamps.
TESTING:
All reports are based on published industry procedures; eld performance may differ from
laboratory performance.
REAL NAIL® BAR HANGERS (NEW CONSTRUCTION HOUSINGS ONLY):
Telescoping, Patented (US Patent D552,969) Real Nail 3 system permits quick placement of
housing anywhere within 24” O.C. joists or suspended ceilings • Bars scored in two locations
for fast, clean breaking, allowing housing installation in tight applications • Bars captive
to mounting frame • Edge-mounted for extra strength • Quick-Loc slot (location identied
on the mounting frame) and oversized locking set screw lock xture in position • May be
installed either perpendicular or parallel to junction box.
JUNCTION BOX:
Pre-wired junction box provided with (6) 1⁄2” and (1) 3⁄4” knockouts on IC versions and (5)
1/2" and (1) 3/4" on TC1 and (5) 1/2" knockouts on TC1R, (4) Non-metallic sheathed cable
connectors and ground wire, U.L. listed/CSA certied for through-branch wiring, maximum
circuit conductors (3 in, 3 out for IC, 4 in, 4 out for TC1, 2 in, 2 out for TC1R) • Junction box
provided with removable access plates • Knockouts equipped with pryout slots • W options
are supplied with push-in electrical connectors for fast installation.
MOUNTING FRAME (NEW CONSTRUCTION HOUSINGS ONLY):
22-gauge die-formed galvanized steel mounting frame • 91⁄8” L x 63⁄4” W, (excluding bar
hangers) • Rough-in section (junction box, mounting frame, housing and bar hangers) fully
assembled for ease of installation • Inner housing is vertically adjustable to accommodate up
to a 13⁄4” ceiling thickness for IC1 and 1 1/4" for TC1.
TC1R HOUSING:
TC housing, 22-gauge galvanized steel • Remodel springs accommodate up to a 11⁄8” ceiling
thickness.
WARRANTY:
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
Specifications Dimensions
13 1/2"
Will expand
to 25"
(Reduces to 8 1/2"
with breakaway
feature)
12 1/4"
6"
6 3/4"
9 1/8"
5 3/8"
12 1/8"
13 1/2"
Will expand
to 25"
(Reduces to 8 1/2"
with breakaway
feature)
6 3/4"
9 1/8"
11 1/2"
5 1/4"
4 3/4"
4 1/2” CEILING CUTOUT
IC1
4 1/2” CEILING CUTOUT
TC1
4 3/8” CEILING CUTOUT
TC1R