Specification
Catalog
Number
Notes
Type
FLUORESCENT 2AV-2X4 T8
2AV 32
Series Trim type Air function
Number
of lamps Lamp type Diuser Voltage Options
2AV 2' wide G Grid trim
ST Screw slot
(blank) Static (no
air function)
A Air return/
supply
1
2
3
Not
included
32 32W
T8
(48")
MDR Metal diuser,
round holes
SBL Straight blade
louver, round
holes
MDM Metal diuser,
mini slots
ADP Acrylic diuser,
linear pris-
matic lens
MDC Metal diuser,
round holes
with large
center slots
1
Others available.
MVOLT
2
347
Others
available.
GEB10IS Electronic ballast, ≤ 10% THD, instant start
GEB10PS Electronic ballast, ≤ 10% THD, programmed rapid start
ADZT Advance "Mark VII" low voltage dimming
S5100 1.0 ballast factor, SIMPLY5
TM
system
3
ALG Acrylic litter guard
1
EL14 Emergency battery pack (nominal 1400 lumens, see Life
Safety section)
GLR Internal fast-blow fuse
4
HW Hardwire for SIMPLY5
TM
system, replaces RELOC® wiring
PWS1836 6' prewire, 3/8" dia., 18-gauge, 3 wires
NY3 New York City approved
CP Chicago plenum approved
APB Air pattern control blades
1
Reector option
ASR Aluminum stepped reector
FEATURES & SPECIFICATIONS
INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open oces,
circulation areas, classrooms, libraries, cafeterias, airport ticketing and wait areas, and numerous other
commercial applications. Static or air functions available. Certain airborne contaminants can
diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for
suitable uses.
CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.
All shieldings pivot on light traps and swing down for easy lamp access.
Molded light traps prevent light leaks between shielding and endplates.
All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.
OPTICS — Twin matte white polyester powder paint nished reectors provide uniform light
distribution. Optimal low brightness diuse aluminum stepped reectors available.
All diusers control direct light distribution and glare by shielding lamps from direct view.
Metal diuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes
backed with white acrylic diuser.
Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered
center. Sides and louver backed with white acrylic diuser.
Metal diuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diuser.
Acrylic diuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diuser.
Metal diuser with center slots (MDC) 52% open metal, .075" diameter holes with 1" wide solid center.
Slotted with 1/2" x 2" open slots. Diuser is backed with white acrylic overlay.
ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed,
CSA certied. Ballasts are sound rated A. Standard combinations conform to UL 935.
INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.
Fixtures can be row mounted end-to-end.
Drywall ceiling adaptors available.
LISTINGS — UL Listed to US and Canadian safety standards. Chicago plenum approved and NYC
approved (see Options).
Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;
413,402; 2,212,513; 87,513.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Note: Specications subject to change without notice.
2AV 2'x4'
LINEAR FLUORESCENT
T8
1, 2 or 3 lamps
Specications
Length: 48 (121.9)
Width: 24 (61.0)
Diuser width: 8 (20.3)
Depth: 5-1/2 (14.0)
5-7/8 (14.9) for air xture
ORDERING INFORMATION
For shortest lead times, congure product using bolded options.
Example: 2AV G 2 32 MDR MVOLT GEB10IS
Notes
1 Refer to options and accessories section for more detailed information.
2 MVOLT (120 - 277 volt).
3 SIMPLY5™ system includes 13' S5SSC RELOC wiring system. Specify voltage
unless HW (hardwire) or PWS1836 is ordered.
4 Must specify voltage, 120 or 277.
Accessories: Order as separate catalog number.
DGA24 Drywall ceiling adapter, unit installation. Use G trim plus
DGA accessory for xture trim ange and xture support in
plaster or plasterboard ceilings.
All dimensions are inches (centimeters) unless otherwise indicated.