Specification

VT Series Volumetric LED Troffer
2VTL
2' x 2'
LED
LED 2VTL2X2
Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE — The VT Series Volumetric LED Troffer (VTL) combines the aesthetics and high performance
with intelligent LED engines for applications such as offices, schools, retail locations and hospitals. High-
efficacy light engines deliver long life and excellent color, ensuring a superior quality lighting installation
that is highly efficient and sustainable. Multiple lumen packages and driver options provide solutions for all
your lighting applications. Featured nLight control system provides design flexibility and ease of installation
and optimum energy savings.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication with
embossed facets. Impact-modified, single clear acrylic diffuser provides excellent shielding and wide
distribution. End plates include integral T-bar clips. Fixture may be mounted and wired in continuous rows.
Total fixture height is only 4-3/8".
OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions, vertical
and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced,
complementary luminous environment. Linear faceted reflector cavity softens and distributes light into
the space while minimizing luminous contrast between the fixture and ceiling. Sloped end plates provide
a smooth, luminous transition between fixture and ceiling while enhancing the perception of fixture depth.
High-performance diffuser provides LED concealment, even illumination across the diffuser and improved
lumen-per-watt performance.
Now available with two different aesthetics including the standard Acrylic Linear Prismatic Diffuser (ADP) and the Acrylic
Linear Prismatic Diffuser with Diffuser Trim Rings (ADPT).
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality
of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight®controls make each luminaire addressable, allowing them to digitally
communicate with other nLight enabled controls such as dimmers, switches, nLight AIR RIO, RES7 occupancy
sensors, and photocontrols. Simply connect all the nLight enabled control devices and the VTLED luminaires
using standard Cat-5 cabling, or the nLight AIR wireless network. Unique plug-and-play convenience allows
devices and luminaires to automatically discover each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides on board intelligence that
actively manages the LED light source so that constant lumen output is maintained over the system life,
preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common energy
codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
SENSOR— Integrated sensor (individual control): Sensor Switch MSD7ADCX (Passive infrared (PIR))
or MSDPDT7ADCX (PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming
photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering
the space. See page 2 for more details on the integrated sensor.
Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability
to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled
sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or
via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.
See page 2 for the nLight sensor options.
Integrated Smart Sensor (nLight Air Wireless Platform): The RES7 sensor is nLight AIR enabled, meaning
it has the ability to communicate over the wireless nLight control platform. It is available with an automatic
dimming photocell, and either a digital PIR microphonics dual technology (PDT)occupancy sensor. It pairs
to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor
adjustment. See page 4 for more details on the Integrated Smart Sensor.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ADP
ADPT
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested
to provide consistent color appearance and out-of-the-box control compatibility
with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless
control networks when ordered with drivers marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
Specifications
Length: 24 (61.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
8-1/4
(21)
24
(61.0)
4-3/8
(11.1)
Dimensions
All dimensions are inches (centimeters) unless otherwise specified.