Specification

ManualsBrandsLithonia Lighting ManualsCeiling Lights3 in. Matte White 2700K Integrated LED Recessed Adjustable Gimbal Kit

3iG

IC/Non-IC

Retroﬁt iGimbal

Speciﬁcations

Aperture: 1-15/16 (4.9)

Ceiling opening: as rough-in

Height: 3-5/16 (8.4)

Overlap trim: 4-1/16 (10.3)

All dimensions are inches (centimeters) unless otherwise indicated.

FEATURES & SPECIFICATIONS

INTENDED USE — The adjustable LED iGimbal downlighting module is 80% more eﬃcient than incan-

descent luminaries, performing for 35,000 hours or more with exceptional energy eﬃciency and near zero

maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall

washing, and highlighting artwork or other architectural features. Retroﬁts into most existing recessed

downlighting installations or new construction and remodel applications.

CONSTRUCTION — Spun steel gimbal reﬂectors with 360° of rotation and at least 45° of adjustable

tilt in both directions. Driver aﬃxed to a static yoke to allow maximization of LED light engine rotation

and pivot movements.

OPTICS — Diﬀused lens at end of mixing chamber to provide even light distribution for general illumina-

tion, equivalent to 50W incandescent ﬂood lamp. Utilizes 2700K, 3000K and 4000K color temperature

LEDs. CRI – 90+. The LED module maintains at least 70% light output for 35,000 hours.

ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector

in the housing. Dimming down to 15%.

INSTALLATION — Suitable for installation in standard height rough-in sections. Splice kit ships stan-

dard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.

Includes three friction clips to ensure easy installation.

LISTINGS — ETL certiﬁed to US and Canadian safety standards. FCC Certiﬁed. ENERGY STAR® certiﬁed;

California T24 compliant. Damp location listed.

WARRANTY — 5-year limited warranty. Complete warranty terms located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

Notes

1 Minimum 90-day lead time for non-standard color ﬁnishes:

minimum 50-piece order quantity.

2 Total system delivered lumens.

3 Minimum 90-day lead time for 4000 K color temperature;

minimum 50-piece order quantity.

DOWNLIGHTING 3iGLED iGIMBAL

3iG LED

Series/Finish Lamp CCT/CRI/W/Lumens

Voltage

3iG 3" iGimbal module MW Matte white

Matte black

Brush nickel

ORB

Oil-rubbed bronze

LED 27K 90CRI 2700K/90CRI/8.7W/530L

30K 90CRI 3000K/91CRI/8.7W/560L

40K 90CRI

4000K/92CRI/8.7W/590L

(blank) 120V

ORDERING INFORMATION

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: 3iGMW LED 27K 90CRI

Catalog

Number

Notes

Type

45°

3-5/16 (8.4)

1-15/16 (4.9)

2-3/16 (5.6)

4-1/16 (10.3)

360°

Splice Kit

(included)

Summary of content (3 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — The adjustable LED iGimbal downlighting module is 80% more efficient than incandescent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features.
PAGE 2
3iG 3" LED iGimbal Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire 3iGMW LED, 2700 K LEDs, input watts: 8.5, delivered lumens: 536, LM/W=62, test no. LTL28997P1, tested in accordance with IESNA LM 79-80.
PAGE 3
iG 3" LED iGimbal Module DIMMING AND ENERGY DATA ENERGY DATA* Lumens 530 560 590 Watts 8.7 8.7 8.7 LPW 61 64 68 CRI Color Temp Minimum Starting Temp 91 91 92 2700 3000 4000 0°F (-18°C) 0°F (-18°C) 0°F (-18°C) FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B Min. Power Factor 0.90 0.90 0.90 Input current 0.07A 0.07A 0.07A EMI/RFI *Values at non-dimming line voltage.