Specification Sheet

ManualsBrandsLithonia Lighting ManualsLightingLithonia OneUp 3 in. White Integrated LED Recessed Kit

Direct-Wire LED Recessed Downlight

3JBK RD

Remodel

Speciﬁcations

Aperture: 2-5/16" (59.0)

Overlap Trim: 4" (103.0)

Height: 4-5/8" (118.7)

Ceiling Opening: 3-3/4" (95)

Min Ceiling Thickness: 1/2" (12.7)

Max Ceiling Thickness: 1-1/2" (38.1)

All dimensions are inches (millimeters).

FEATURES & SPECIFICATIONS

INTENDED USE — The OneUp™ recessed direct-wire LED downlight includes integrated junction box,

trim, pre-installed non-metallic push-in connectors, and wago connectors in one package. The OneUp is

the most economical means to create a well lit environment with exceptional energy eﬃciency and near

zero maintenance.

CONSTRUCTION — Spun steel, round baﬄe trim. Integrated galvanized steel junction box with captive

door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature

LEDs.

OPTICS — Round baﬄe recesses optical system into the ceiling to prevent glare and provide a

traditional look. Diﬀused lens provides even light distribution for general illumination, equivalent to

50W incandescent ﬂood lamp. Wide ﬂood beam angle at >90°. CRI >90. Maintains at least 70% light

output for 50,000 hours.

INSTALLATION — Tool-less installation. Secure trim retention with two side-mounted spring clips for

easy installation in plaster, sheet rock, or plywood ceilings. Two non-metallic push-in connectors and

three wago connectors pre-installed. Rated for Type IC installations. Maximum of 4 No. 12AWG through

branch circuit conductor suitable for 90°C permitted in box. Ground wire provided.

ELECTRICAL SYSTEM — LED module with high-eﬃciency on board driver. Dimming down to 10%. For

compatible dimmers, refer to: Compatible dimmers Chart.

Actual wattage statement needs to be a separate line by itself.

LISTINGS — ETL certiﬁed to US and Canadian safety standards. Can be used to comply with California

Title 24 Part6 High Eﬃcacy LED Light Source Requirements. WSEC ASTEM E283 for Air-Tight rated with

gasket or caulking between ﬁxture trim and ceiling. ENERGY STAR® certiﬁed. Wet location listed.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

DOWNLIGHTING 3JBK RD

Catalog

Number

Notes

Type

Notes

1 Total System Delivered Lumens.

4.67 [118.7]



4.06 [103.0]

2.83 [72.0]

Series Shape CCT/ Watts/Lumens

CRI Finish

3JBK RD Round 30K 3000K/6.91Watts 90CRI 90 CRI MW Matte White

ORDERING INFORMATION

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: 3JBK RD 30K 90CRI MW

IC RATED

AIRTIGHT

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — The OneUp™ recessed direct-wire LED downlight includes integrated junction box, trim, pre-installed non-metallic push-in connectors, and wago connectors in one package. The OneUp is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Type Direct-Wire LED Recessed Downlight CONSTRUCTION — Spun steel, round baffle trim.
PAGE 2
LUMENS PER LAMP: 502.2486 [_PRODUCTID]d9ce319e-2332-452b-a299-095de7b126fe [_LAMPPOSITION]0 , 0 [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS]502.3 [_PHYSICALDIMENSIONS]0.25, 0.25, 0 [_VLC_SIGNALING_APERTURE]0, 0, 0 [_ABSOLUTE] NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. [_ABSOLUTELUMENS]502.9 [_INPUT_ELECTRICAL]120.1 VOLTS, 6.90 WATTS, 0.0579 AMPS [_TEMP0] AMBIENT: 25.2 3JBK RD OneUP™ Direct-Wire LED PHOTOMETRICS Distribution Curve Distribution Data Spacing to Mounting Height:1.