Specification

Catalog
Number
Notes
Type
4G1
IC/Non-IC
Retrot Gimbal
Specications
Aperture: 2-7/16 (6.1)
Ceiling opening: as rough-in
Length: 3-7/8 (9.9)
Height: 4 (10.2)
Overlap trim: 5-1/4 (13.2)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE — The adjustable LED Gimbal downlighting module is 80% more ecient than incan-
descent luminaries, performing for 35,000 hours or more with exceptional energy eciency and near zero
maintenance. Multiple trim nish options are available to pick the style that matches the décor for any
oce or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall
washing, and highlighting artwork or other architectural features. Retrots into most existing recessed
downlighting installations or new construction and remodel applications.
CONSTRUCTION — Spun steel gimbal reectors with 180° of rotation and at least 35° of adjustable
tilt in both directions. Driver axed to a static yoke to allow maximization of LED light engine rotation
and pivot movements.
OPTICS — Diused lens at end of mixing chamber to provide even light distribution for general illumina-
tion, equivalent to 50W incandescent ood lamp.
Wide ood beam angle at >90°. CRI >90. Equivalent to 50W incandescent. The LED module maintains
at least 70% light output for 35,000 hours.
ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector
in the housing. Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart.
INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter and
splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title
24 compliance. Includes three friction clips to ensure easy installation.
LISTINGS — CSA certied to US and Canadian safety standards. ENERGY STAR® certied; California T24
compliant. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may dier as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Notes
1 Available in 90CRI only.
2 Total system delivered lumens.
3 Must be ordered on a separate line.
4 To install LED Gimbal, remove socket and assembly leaving
socket wires. Install using hardwire kit provided.
DOWNLIGHTING 4G1 LED 90CRI GIMBAL
2-7/16
(6.1)
3-7/8
(9.9)
5-1/4
(13.2)
4
(10.2)
35°
D
I
M
M
A
B
L
E
E26 Adaptor
(included)
Hardwire Kit
(included)
4G1 LED
Series/Finish Lamp CCT/CRI/W/Lumens
2
Voltage Options
4G1 4" Gimbal
module
MW Matte white
1
MB Matte black
BN Brush nickel
ORB Oil-rubbed bronze
LED (blank) 3000K/83CRI/7.9W/435L
27K 90CRI 2700K/91CRI/8.3W/480L
30K 90CRI 3000K/93CRI/7.7W/500L
40K 90CRI 4000K/94CRI/8W/560L
(blank) 120V L3LED T24 IC/Non-IC rated, new construction
rough-in LED base
L3RLED T24 IC/Non-IC rated, remodel rough-in
LED base
L3 IC/Non-IC rated, new construction
rough-in
3,4
L3R IC/Non-IC rated, remodel rough-in
3,4
ORDERING INFORMATION
For shortest lead times, congure product using standard options (shown in bold).
Example: 4G1MW LED 27K 90CRI L3LED T24