Specification

4iG
IC/Non-IC
Retrofit iGimbal
Specifications
Aperture: 2-11/16 (6.8)
Ceiling opening: as rough-in
Height: 4-1/8 (10.5)
Overlap trim: 5-1/8 (13.0)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE — The adjustable LED iGimbal downlighting module is 80% more efficient than incan-
descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero
maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall
washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed
downlighting installations or new construction and remodel applications.
CONSTRUCTION — Spun steel gimbal reflectors with 360° of rotation and at least 50° of adjustable
tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation
and pivot movements.
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina-
tion, equivalent to 50W incandescent flood lamp. Utilizes 2700K, 3000K and 4000K color temperature
LEDs. CRI – 90+. The LED module maintains at least 70% light output for 35,000 hours.
ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector
in the housing. Dimming down to 15%.
INSTALLATION — Suitable for installation in standard height rough-in sections. Splice kit ships stan-
dard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.
Includes three friction clips to ensure easy installation.
LISTINGS — ETL certified to US and Canadian safety standards. FCC Certified. ENERGY STAR® certified;
Certified to the high efficacy requirements of California T24. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Notes
1 Minimum 90-day lead time for non-standard color finishes in 2700K, 3000K, and
4000K color temperatures. Minimum 50 piece order quantity.
2 Total system delivered lumens.
3 Must be ordered on a separate line.
4 To install LED iGimbal, remove sockets and assemble leaving socket wires. Install
using hardwire kit provided.
DOWNLIGHTING 4iGLED iGIMBAL
D
I
M
M
A
B
L
E
4iG LED
Series/Finish Lamp CCT/CRI/W/Lumens
2
Voltage Options
4iG 4" iGimbal module MW Matte white
MB Matte black
BN Brush nickel
1
ORB Oil-rubbed
bronze
1
LED 27K 90CRI 2700K/92CRI/9.8W/610L
30K 90CRI 3000K/92CRI/9.8W/640L
40K 90CRI 4000K/94CRI/9.8W/670L
(blank) 120V L3LED T24 IC/Non-IC rated, new construction
rough-in LED base
L3RLED T24 IC/Non-IC rated, remodel rough-in
LED base
L3 IC/Non-IC rated, new construction
rough-in
3,4
L3R IC/Non-IC rated, remodel rough-in
3,4
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: 4iGMW LED 27K 90CRI L3LED T24
Catalog
Number
Notes
Type
°
4-1/8 (10.5)
2-11/16 (6.8)
2-15/16 (7.5)
5-1/8 (13.0)
360°
50°
Splice Kit
(included)
MW MB ORB BN