Specification Sheet

Catalog
Number
Notes
Type
DOWNLIGHTING 5G1 LED GIMBAL
5G1 LED
Series/Finish Lamp/Lumen
1
Color temperature Voltage Options
Series
5G1 5" Gimbal module
Finish
MW Matte white
MB Matte black
BN Brush nickel
ORB Oil-rubbed bronze
LED 600 lumens, 10.8 watts (blank) 3000K (blank) 120V L5LED T24 New construction rough-in (LED connector)
L5RLED T24 Remodel rough-in (LED connector)
L5 New construction rough-in
2
L5R Remodel rough-in
2
ORDERING INFORMATION
For shortest lead times, congure product using bolded options.
Example: 5G1MW LED L5LED T24
FEATURES & SPECIFICATIONS
INTENDED USE — The adjustable LED Gimbal downlighting module is 80% more ecient than incan-
descent luminaries, performing for 35,000 hours or more with exceptional energy eciency and near zero
maintenance. Multiple trim nish options are available to pick the style that matches the décor for any
oce or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall
washing, and highlighting artwork or other architectural features. Retrots into most existing recessed
downlighting installations or new construction and remodel applications.
CONSTRUCTION — Spun steel gimbal reectors with 180° of rotation and at least 35° of adjustable
tilt in both directions. Driver axed to a static yoke to allow maximization of LED light engine rotation
and pivot movements.
OPTICS — Diused lens at end of mixing chamber to provide even light distribution for general illumina-
tion, equivalent to 65W incandescent ood lamp.
Wide ood beam angle at >90°. Utilizes 3000 K color temperature LEDs. CRI – 80+. The LED module
maintains at least 70% light output for 35,000 hours.
ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector
in the housing. Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart.
Standard input wattage is 10.8 watts, 55 lumens per watt; equivalent to 65-watt incandescent.
INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter
and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for
Title 24 compliance. Trim retention is achieved by utilizing two side-mounted torsion springs to ensure a
consistently tight t with the ceiling and easy installation.
LISTINGS — CSA certied to US and Canadian safety standards. ENERGY STAR® qualied; California T24
compliant. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual wattage may dier by +/-5% when operating at 120V +/-10%.
Note: Specications subject to change without notice.
5G1
IC/Non-IC
Retrot Gimbal
3
(7.6)
4-5/8
(11.7)
6-7/16
(16.3)
4-5/16
(10.9)
35°
Specications
Aperture: 3 (7.6)
Ceiling opening: as rough-in
Length: 4-5/8 (11.7)
Height: 4-5/16 (10.9)
Overlap trim: 6-7/16 (16.3)
All dimensions are inches (centimeters) unless otherwise indicated.
Accessories: Order as separate catalog number.
TSA5 Makes non-bracket housings compatible with LED module
Notes
1 Total system delivered lumens.
2 Must be ordered on a separate line.
D
I
M
M
A
B
L
E
E26 Adaptor
(included)
Hardwire Kit
(included)