Cut Sheet

All dimensions are inches (centimeters).
Example: 6O1
FEATURES & SPECIFICATIONS
INTENDED USE
For use with rough-in LP6 and housings LC6, LI6, L7X, L7XR, L7XF, LI6F, L7XF
RECF, LI6F RECF.
CONSTRUCTION
Antique bronze, oil-rubbed bronze, brushed nickel, polished brass and
white finishes are one-piece aluminum reflectors with integral flange.
INSTALLATION
Socket to trim interface.
Retaining clips riveted to top of reflector hold trim inside housing.
Rough-ins with clips retain trims.
Maximum ceiling thickness 1/2".
LISTING
UL Listed to U.S. and Canadian safety standards.
Damp location listed.
Specifications
Height: 6-1/2 (16.5)
Lamp Opening: 5 (12.7)
Diameter: 7-5/8 (19.4)
Trim heights when used with
Non-IC Rough-Ins.
6" Full Reflector Trim
6O1
PREMIUM OPEN
Wide Flange
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on
the appropriate line.
Housing Compatibility
Housing and trim ordered separately.
Maximum
Application Source wattage Housing
IC Incandescent 75 PAR30 LC6, LI6, L7X, L7XR
65 BR30 LC6, LI6, L7X, L7XR
60 A19 LI6
Fluorescent 13 DTT LI6F RECF, L7XF, L7XF RECF
26 TRT LI6F RECF, L7XF RECF
32 TRT LI6F
Non-IC Incandescent 75 PAR30 LP6
65 BR30 LP6
100 A19 LP6
Fluorescent 18 TRT L7XF
Series
6O1
6O1
Finish
(blank) White
BN Brushed nickel
BZA Antique bronze
ORB Oil-rubbed bronze
PB Polished brass
5" (12.7)
7-5/8" (19.4)
6-1/2"
(16.5)
Downlighting and Track Sheet #: 6O1 ROPN-100
Catalog Number
Notes Type