Instructions / Assembly

isopropyl alcohol to water. Abrasive cleaners and materials, as well as paper towels or any other wood-
based fabric products, should be avoided.
The cleaning solution should be sprayed on to the surface of the specular reflector and then quickly wiped
off longitudinally (in the same direction that the lamps would run) with a clean, damp cotton cloth. Once
thoroughly cleaned, the reflector surface should be lightly wiped off longitudinally with a dry cotton cloth
Lens Panels
To remove finger marks and typical dirt accumulation:
1. Run a soft cloth dampened with a solution of warm water and a mild liquid detergent along the length of
the fixture.
2. Rinse, using a different clean cloth dampened only with water.
3. To avoid streaking, run a dry cloth along the length of the fixture.