Specification
One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | www.lithonia.com
© 2014-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 09/23/19 Page 2 of 2
CONTRACTOR SELECT BLC
INTENDED USE:
The BLC troffer delivers soft, glare-free, ambient lighting in a popular center-basket design.
The slim prole of the luminaire, coupled with energy-saving LED technology make the
BLC an ideal choice for renovation or new construction. The BLC troffer offers a high-quality,
cost-effective LED lighting solution for schools, ofces, retail, healthcare facilities and other
commercial spaces.
CONSTRUCTION:
The reector is nished with a highly reective paint for improved aesthetics and increased
light diffusion.End plates contain easy-to-position integral T-bar clips for securely attaching
the luminaire to the T-grid. For additional T-grid security, optional screw on T-bar clips are
available. Diffusers are extruded from impact modied acrylic for increased durability. LED
boards and drivers are accessible from the plenum.
OPTICS:
Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions and
vertical and horizontal work surfaces – rendering the interior space, objects and occupants in
a more balanced, complimentary luminous environment. High performance extruded acrylic
diffusers conceal LEDs and efciently deliver light in a volumetric distribution.
ELECTRICAL:
Long-life LEDs, coupled with high-efciency drivers, provide superior quantity and quality
of illumination for extended service life. 80% LED lumen maintenance at 60,000 hours
(L80/60,000). 0-10 volt dimming driver. Dims to 10%.
INSTALLATION:
With a depth of only 2-3/8", the BLC makes for an easy installation, especially in restrictive
plenum applications. The BLC ts into standard 15/16" and narrow 9/16" T-grid ceiling
systems. Suitable for damp location.
For recessed mounting in hard ceiling applications, Drywall Grid Adapters (DGA) are available
as an accessory. See Accessories section.
LISTINGS:
CSA Certied to meet U.S. and Canadian standards. IC rated.
DesignLights Consortium® (DLC) qualied product. Not all versions of this product may be
DLC qualied. Please check the DLC Qualied Products List at www.designlights.org/QPL to
conrm which versions are qualied.
WARRANTY:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
All dimensions are inches (centimeters)
unless otherwise indicated.
2X4 Length: 47-3/4 (121.2)
2X2 Length: 23-3/4 (60.3)
Width: 23-3/4 (60.3)
Depth: 2-3/8 (6.0)