Installation Instructions

Page 3 of 3
LED IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This fixture must be installed in accordance with local, federal codes and the NEC.
1. Read all instructions completely before beginning. Keep these instructions in safe place for future reference.
2. To reduce risk of fire and over-heating, make sure all connections are tight.
3. Turn off the electrical power before proceeding.
Note:
1. This 2x2 and 2x4 LED fixtures are for insulated ceiling applications using 2’x2’ and 2’x4’ T-bar grid drop ceilings. These fixtures are designed
for use in 120-277V, 347V, 50/60Hz protected circuit (fuse box, circuit breakers) and 90°C rated supply wire.
2. For drywall or 9/16” ceiling applications, drywall mounting frame and 9/16” fixture clips are available. Consult factory for details.
Installing 2x2 and 2x4 fixtures: