Specification Sheet

ManualsBrandsLithonia Lighting ManualsAll Lithonia LightingLithonia Lighting Sensor Switch Low Voltage Passive Infrared (PIR) High Bay 360° Ceiling Mount Occupancy Sensor

SPECIFICATIONS

ORDERING INFO

OPTIONS

LOW VOLTAGE RELAY (R)

• Enables sensors to interface with

other systems (e.g., BMS, lighting

panels)

• Provides dry contact closure via a

SPDT, 1 Amp, 40 Volt relay

• Only one relay needed per zone

• Changes state when all connected

sensors register unoccupied

• Relay requires sensor power to

function

OCCUPANCY CONTROLLED

DIMMING (D)

• Provides dimming output to control

0-10 VDC dimmable ballasts

• Provides a second occupancy time-

out period that enables the lights to go

to a dim setting before turning off

• Adjustable max/min dim setting

• Only one sensor per zone needs to

have dimming output

PHOTOCELL (P)

• Auto set-point calibration

• Two selectable modes of operation

• On/Off mode: Photocell has full

control during periods of occupancy

• Inhibit mode: Photocell can prevent

lights from turning on if adequate

daylight is available, but cannot turn

lights off

LOW TEMP/HIGH HUMIDITY (LT)

• Sensor is corrosion resistant to

moisture

• Operates down to -40º F/C

OVERVIEW

Designed for mounting heights of up to 45

ft (13.72 m), the CM 6 High Bay 360º sensor

provides Passive Infrared (PIR) occupancy

detection over a 15-20 ft (4.57- 6.10 m) radial

coverage pattern that overlaps the areas

lit by a typical high bay xture. Applications

include warehouses, racquetball courts, and

gymnasiums. Multiple xture control is best

handled by using multiple CM 6 sensors

together as needed. When used with standard

power packs, these sensors are ideal for on/off

control of T5/T8 uorescent lighting. However,

HID bi-level xtures can also be controlled

when the CM 6 is partnered with a PP20 SH

power pack with the start-to-high feature. For

lower mounting height applications, CM 9 or CM

10 Series sensors are recommended.

SENSOR OPERATION

The sensor detects changes in the infrared

energy given off by occupants as they move

within the eld-of-view. When occupancy is

detected, a DC output goes high and can

drive up to 200 mA of connected load. The

sensor is powered with 12-24 VAC/VDC and

typically operates with a PP20 or MP20 power

pack, enabling complete 20 Amp circuits to be

controlled. This innovative sensor requires no

eld calibration or sensitivity adjustments.

LAMPMAXIMIZER

This sensor also contains patent pending

LampMaximizer technology that allows users

to aggressively target energy savings while still

protecting lamp life. A minimum on timer, factory

set at 15 minutes, helps preserve lamp life by

eliminating all lamp cycles shorter than lamp

manufacturers’ recommedations specify.

A standard occupancy time delay is also present

that ensures lights turn off (assuming minimum

on timer has elapsed) if no occupancy is

detected. This timer is factory set at 10 minutes

to promote energy savings, but is adjustable

between 30 seconds and 20 minutes. These

adjustments can be done manually, through

the unit’s push-button, or automatically every

two weeks through an advanced mode, called

LampMaximizer+, that determines the optimum

time delay in order to maximize both lamp life

and energy savings. Additionally, this sensor

maintains statistics on total lamp on time and

number of cycles.

HIGH BAY 360º SENSOR

CEILING MOUNT • LOW VOLTAGE • PASSIVE INFRARED (PIR)

CM 6

FEATURES

100% Digital PIR Detection,

Excellent RF Immunity

360º Coverage Pattern

Up to 45 ft Mounting

Push-Button Programmable

User Adjustable Time Delays

No Field Calibration or Sensitivity

Adjustments Required

Convenient Test Mode

100 hr Lamp Burn-in Timer

Green LED Indicator

LAMPMAXIMIZER

TECHNOLOGY

• Protects Lamp Life while

Maximizing Energy Savings

• Minimum On Timer (15 min default)

• Occ. Time Delay (10 min default)

• LampMaximizer+ Mode -

Optimizes Lamp Life & Energy

Savings (disabled by default)

• Switch Counter (in 1000’s)

• Total Lamp On Time (in khrs)

PHYSICAL SPECS

SIZE 4.55” Dia. (11.56 cm)

1.55” Deep (3.94 cm)

WEIGHT 6 oz

MOUNTING

Ceiling Tile Surface

3.5” Octagon Box

Single Gang Handy Box

COLOR White

ELECTRICAL SPECS

OPERATING VOLTAGE

12-24 VAC/ VDC

CURRENT DRAW

Standard, 4 mA

w/ R option, 16 mA

DIMMING LOAD Sinks < 20mA;

~40 Ballasts @ .5mA each

RECOMMENDED POWER PACK

PP20

ENVIRONMENTAL SPECS

OPERATING TEMP

14º to 160º F (-10º to 71º C)

RELATIVE HUMIDITY

20 to 90% non-condensing

SILICONE FREE

ROHS COMPLIANT

RELAY

TEMP/HUMIDITY

Blank = None Blank = None Blank = Standard

R = Low Voltage Relay D = Occupancy Controlled Dimming LT = Low Temp

P = Photocell

CM 6 [RELAY] [DIMMING/PHOTOCELL] [TEMP/HUMIDITY]

DIMMING / PHOTOCELL CHOOSE ONE ONLY

C US LISTED

TITLE 24

ASSEMBLED in U.S.A.

5 YEAR WARRANTY

Summary of content (2 pages)

PAGE 1
® CM 6 HIGH BAY 360º SENSOR CEILING MOUNT • LOW VOLTAGE • PASSIVE INFRARED (PIR) SPECIFICATIONS FEATURES 100% Digital PIR Detection, Excellent RF Immunity 360º Coverage Pattern Up to 45 ft Mounting Push-Button Programmable User Adjustable Time Delays No Field Calibration or Sensitivity Adjustments Required Convenient Test Mode 100 hr Lamp Burn-in Timer Green LED Indicator LAMPMAXIMIZER® TECHNOLOGY • Protects Lamp Life while Maximizing Energy Savings • Minimum On Timer (15 min default) • Occ.
PAGE 2
Revised 03.26.12 © 2012 Sensor Switch COVERAGE PATTERN 0 m 0 ft 0 m 0 ft 6 HIGH BAY 360º LENS • Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting heights • 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area lit by a typical high bay fixture • Excellent detection of large motion (e.g. walking) up to a 35 ft (10.76 m) mounting height • Excellent detection of extra large motion (e.g. forklifts) up to a 45 ft (13.72 m)mounting height LOW VIEW LOW VIEW 3 6 3 10 10 6 20 20 9.1 30 9.