Specification

LED CPANL with bracket
Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE The CPANL™ Series LED surface mount flat luminaire features an internal 120 volt
triac dimming driver, color switching technology and ceiling flush mounting kit. This reliable and rigid
flat panel is visually comfortable and can be recessed in a lay in ceiling or surface mounted to a hard
ceiling with included accessories. The CPANL can be suspended or surface box mounted with accessories
sold separately. The CPANL was designed for residential and light commercial applications including
retail and offices. Certain airborne contaminants can diminish the integrity of acrylic and/or
polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION — Built to last with an aluminum frame for strength and durability, the seamless frame
prevents light leak in the corners. The satin white lens provides excellent shielding and fully luminous
appearance. CPANL's low-profile design provides increased installation flexibility especially in restricted
plenum spaces. The back plate includes integral T-bar clips for installation into T-grid ceilings.
ELECTRICAL Long-life LEDs, coupled with a high-efficiency driver, provide superior illumination
for extended service life. 70% LED lumen maintenance at 60,000 hours (L70/60,000). The line voltage
dimming driver, dims to 10% without the need to run low voltage wiring. Compatible with most standard
incandescent dimers, see list of approved dimmers on page 2.
LISTINGS CSA certified to meet US and Canadian standards. Intended for indoor use only. Product is
not to be stored in non-climate controlled spaces. Damp location listed. IC rated. IP5X rated. Rated and
certified to meet NSF Splash Zone 2.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
CPANL LED
Surface Mount luminaire
1' x 4', 2' x 2'and 2' x 4'
* Bolded color temperature designates default switch setting.
ORDERING INFORMATION
Catalog Number UPC Description Nominal Lumens Color Temperature CRI Voltage Wattage
CPANL 1X4 40LM SWW7 120 TD DCMK 00194995063208 1x4 Switchable CCT Flat Panel with Bracket 4000 3500/4000/5000K 80CRI 120V 38
CPANL 2X2 33LM SWW7 120 TD DCMK 00194995063239 2x2 Switchable CCT Flat Panel with Bracket 3300 3500/4000/5000K 80CRI 120V 37
CPANL 2X4 40LM SWW7 120 TD DCMK 00194995063246 2x4 Switchable CCT Flat Panel with Bracket 4000 3500/4000/5000K 80CRI 120V 36
1.1"
23.79
23.79
IC RATED
3500K 4000K 5000K
SWITCHABLE WHITE
CPANL Mounted with DCMK

Summary of content (3 pages)