FAQ

CPANL
™
How can the CPANL LED Flat Panel be mounted?
Suspended, surface box moun
ted, recessed.
Does the CPANL have an external driver?
No, the CPANL has an internal driver with no driver box for a
completely symmetrical look when suspended.
Does the CPANL bow or sag when suspended?
No, the CPANL features an extremely rigid, deep drawn back
plate which allows it to be suspended without sagging or bowing.
How does the switchable lumen feature work?
CPANL features a three-position switch on the back of the fixture
covered by a sticker. When the customer is ready to adjust
lumens, the sticker can be removed with a knife and the switch
can be toggled to the desired lumen output.
Can the fixture be dimmed via 0-10V dimming wires?
Yes. For best results when utilizing 0-10V dimming, keep all
fixtures set to the default (highest) lumen setting.
Does the CPANL come with T-Grid clips?
Yes, the CPANL features integral grid clips for T-Grid lay
in applications.
Are all CPANL fixtures a part of the
Contractor Select
™
program?
No, only the 2x2 and 2x4 fixtures are part of
Contractor Select. The 1x4 fixtures are not included in the
Contractor Select program.
When dimming the fixture does the wattage change?
Yes, as the fixture’s lumens decrease so does the fixture’s wattage.
How many configurations of CPANL are DLC listed?
All CPANL configurations are DLC standard listed.
What distribution of light does the CPANL feature?
The CPANL has Lambertian distribution.
Frequently Asked Questions
One Lithonia Way, Conyers, GA 30012 | Phone: [phone] | www.acuitybrands.com
© 2018 Acuity Brands Lighting, Inc. All Rights Reserved. | LL_8814.01_1218
Visit www.lithonia.com for more information