Specification
One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | www.lithonia.com
© 2018-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/25/22 Page 3 of 3
CONTRACTOR SELECT CPX LED
605mm
23.8in
605mm
23.8in
605mm
23.8in
43mm
1.7in
605mm
23.8in
1214mm
47.8in
1214mm
47.8in
43mm
1.7in
INTENDED USE:
CPX is a low-glare panel featuring an external driver. This cost-effective, reliable panel is visually
comfortable and can be recessed mounted. Suitable for many applications such as schools, ofces,
retail, convenience stores and other commercial spaces. Certain airborne contaminants can
diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table
for suitable uses. Adjustable Lumen (ALO7, ALO8) and Switchable White (SWW7) congurations
available. U.S. Patent No. 10,681,784.
CONSTRUCTION:
The extruded aluminum frame with satin white lens provides excellent shielding and uniform
luminance. The low-prole design of CPX provides increased installation exibility especially in
restricted plenum spaces. The backplate includes integral T-bar clips for installation into T-grid ceilings.
ELECTRICAL:
Long-life LEDs, coupled with a high-efciency driver, provide superior illumination for extended
service life. Greater than 70% LED lumen maintenance at 50,000 hours (L70>50,000). 0-10V
dimming driver, dims to 10% and contains non-isolated dimming leads.
LISTINGS:
CSA certied to meet US and Canadian standards. Damp location listed. IC rated. IP5X Rated.
DesignLights Consortium® (DLC) qualied product. Not all versions of this product may be DLC
qualied. Please check the DLC Qualied Products List at www.designlights.org/QPL to conrm which
versions are qualied. Rated for NSF/ANSI Standard 2 - Light Fixture for Splash Zone andNon Food
Zone. NOM Certied.
WARRANTY:
5-year limited warranty. This is the only warranty provided and no other statements in this
specication sheet create any warranty of any kind. All other express and implied warranties are
disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-
and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
All dimensions are inches (millimeters) unless otherwise indicated.
2'x2'
2'x4'