Specification Sheet

One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | www.lithonia.com
© 2018-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/06/21 Page 3 of 3
CONTRACTOR SELECT CPX LED
605mm
23.8in
605mm
23.8in
605mm
23.8in
43mm
1.7in
605mm
23.8in
1214mm
47.8in
1214mm
47.8in
43mm
1.7in
INTENDED USE:
CPX is a low-glare panel featuring an external driver. This cost-effective, reliable panel
is visually comfortable and can be recessed mounted. Suitable for many applications
such as schools, ofces, retail, convenience stores and other commercial spaces. Certain
airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses. Adjustable Lumen (ALO7, ALO8)
and Switchable White (SWW7) congurations available. U.S. Patent No. 10,681,784.
CONSTRUCTION:
The extruded aluminum frame with satin white lens provides excellent shielding and uniform
luminance. The low-prole design of CPX provides increased installation exibility especially
in restricted plenum spaces. The backplate includes integral T-bar clips for installation into
T-grid ceilings.
ELECTRICAL:
Long-life LEDs, coupled with a high-efciency driver, provide superior illumination
for extended service life. Greater than 70% LED lumen maintenance at 50,000 hours
(L70>50,000). 0-10V dimming driver, dims to 10% and contains non-isolated dimming
leads.
LISTINGS:
CSA certied to meet US and Canadian standards. Damp location listed. IC rated. IP5X Rated.
DesignLights Consortium® (DLC) qualied product. Not all versions of this product may be
DLC qualied. Please check the DLC Qualied Products List at www.designlights.org/QPL to
conrm which versions are qualied. Product is rated and certied to meet NSF Splash Zone2.
NOM Certied.
WARRANTY:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
All dimensions are inches (millimeters) unless otherwise indicated.
2'x2'
2'x4'