Specification

ManualsBrandsLithonia Lighting ManualsOtherCaramel Swirl Bullet Shade for LED Mini Pendant

LED Mini-Pendant Fitters with Mix-and-Match Shades

MDP

HIGHPERFORMANCE LED

FEATURES & SPECIFICATIONS

INTENDED USE

Provides maintenance-free, energy-eﬃcient accent and/or task lighting in residential and light commercial

applications. Mix and match ﬁtters with any number of decorative shades/diﬀusers from Lithonia Lighting

(see decorative shade ordering information on second page) to create a look that perfectly compliments any

décor. Ideal for mounting over kitchen islands, countertops, bars, desks and tables.

CONSTRUCTION

Cast aluminum ﬁtters and matching canopies are ﬁnished in either a bronze or polished brushed nickel.

Includes three set screws which hold decorative shades that mount to the inside of the ﬁtter. These shades

have a standard 2-1/4” neck.

Decorative shades that mount to the outside of the ﬁtter include decorative ﬁnials or decorative rods, three

bronze and three polished brushed nickel, that screw into the ﬁtter.

Decorative shades are available in hand-blown glass, prismatic glass or metal. All decorative shades ﬁt

both ﬁtter styles.

Decorative shades sold separately (see shade ordering information on second page).

OPTICS

Each ﬁtter contains three 3000K high-performance LEDs which maintain 274 lumen output at 50,000-hour

life.

ELECTRICAL

LED driver is 120V and operates at 60Hz.

Fully dimmable down to 10%. Works with most standard incandescent dimmers. See chart on second page

for suggested dimmers.

INSTALLATION

Suspended mount from ceiling. Includes 78” of cable for tool-free mounting height adjustment. Excess cable

ﬁts within canopy - no cutting necessary.

All mounting hardware included.

LISTINGS

UL listed to U.S. and Canadian safety standards.

WARRANTY

5-year limited warranty. Complete warranty terms located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

NOTE: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25°C.

Speciﬁcations subject to change without notice.

Dimensions

Bullet Fitter: Cylinder Fitter:

Canopy Width: 5” (12.7) Canopy Width: 4-1/2” (11.4)

Canopy Height: 1-7/8” (4.8) Canopy Height: 1-7/8” (4.8)

Fitter Width: 2-3/4” (7) Fitter Width: 2-5/8” (6.7)

Fitter Height: 2” (5.1) Fitter Height: 1-7/8” (4.8)

Both ﬁtter styles include 78” of cable for tool-free mounting height adjustment.

All dimensions are inches (centimeters).

MDP

Series

Finish

MDPB Bullet LED mini-pendant ﬁtter

MDPC Cylinder LED mini-pendant ﬁtter

BZ Bronze

BNP Polished Brushed Nickel

Notes

1 Glass shades must be ordered separately. See Shade Ordering Information.

ORDERING INFORMATION

For shortest lead times, conﬁgure products using bolded options.

Example: MDPB BZ

See reverse side for decorative shade ordering information.

Model (see product images on back of sheet)

DRBL 1001 Ball shade in opal white ﬁnish DMCN BZ Metal cone shade in bronze ﬁnish DSCL 1010 Short cylinder shade in white drizzle ﬁnish

DRBL 1008 Ball shade in green melon ﬁnish DMCN BNP Metal cone shade in polished brushed nickel ﬁnish DSBL 1001 Small bell shade in opal white ﬁnish

DBEL 1001 Bell shade in opal white ﬁnish DCBL 1009 Concave bell shade in amber twist ﬁnish DTCL 1001 Tall cylinder shade in opal white ﬁnish

DBIL 1015 Billet shade in rain-drop ﬁnish DGDT 1003 Cylinder dot shade in frosted white ﬁnish DTCL 1005 Tall cylinder shade in apple red ﬁnish

DBLT 1001 Bullet shade in opal white ﬁnish DGWV 1003 Cylinder wave shade in frosted white ﬁnish DTCL 1009 Tall cylinder shade in amber twist ﬁnish

DBLT 1004 Bullet shade in caramel swirl ﬁnish DGNG 1007 Glass in glass shade in blue ﬁnish DTCL 1010 Tall cylinder shade in white drizzle ﬁnish

DCNE 1001 Cone shade in opal white ﬁnish DPRG 1011 Prismatic shade with clear ribbed glass DTRB 1014 Top rib shade in caramel mocha swirl ﬁnish

DCNE 1002 Cone shade in white melon ﬁnish DSCL 1001 Short cylinder shade in opal white ﬁnish DZNT 1003 Zentro shade in frosted white ﬁnish

DCNE 1006 Cone shade in cobalt blue ﬁnish DSCL 1005 Short cylinder shade in apple red ﬁnish DZNT 1007 Zentro shade in blue ﬁnish

DCNE 1008 Cone shade in green melon ﬁnish DSCL 1009 Short cylinder shade in amber twist ﬁnish

Example: DTCL 1005

SHADE ORDERING INFORMATION

For shortest lead times, conﬁgure products using bolded options.

Bullet Fitter

Cylinder Fitter

DECORATIVE INDOOR MDP

Catalog

Number

Notes

Type

Summary of content (2 pages)

PAGE 1
Catalog Number Notes LED Mini-Pendant Fitters with Mix-and-Match Shades MDP HIGH-PERFORMANCE LED Bullet Fitter Cylinder Fitter MAB M See reverse side for decorative shade ordering information. WARRANTY 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C.
PAGE 2
LED Mini-Pendant Fitters and Shades PHOTOMETRICS Full photometric data report available within two weeks from request. Consult factory. Actual wattage may differ by +/- 5% when operating at 120V +/- 10%. Actual performance may differ as a result of end-user environment and application. Suggested Dimmers The MDP Series is designed to operate with most standard Triac Based (Forward Phase-Control or Leading Edge) dimmers and is not compatible with 0-10v dimming systems.