Specification

LED Mini-Pendant Fitters with Mix-and-Match Shades
MDP
HIGHPERFORMANCE LED
FEATURES & SPECIFICATIONS
INTENDED USE
Provides maintenance-free, energy-ecient accent and/or task lighting in residential and light commercial
applications. Mix and match tters with any number of decorative shades/diusers from Lithonia Lighting
(see decorative shade ordering information on second page) to create a look that perfectly compliments any
décor. Ideal for mounting over kitchen islands, countertops, bars, desks and tables.
CONSTRUCTION
Cast aluminum tters and matching canopies are nished in either a bronze or polished brushed nickel.
Includes three set screws which hold decorative shades that mount to the inside of the tter. These shades
have a standard 2-1/4” neck.
Decorative shades that mount to the outside of the tter include decorative nials or decorative rods, three
bronze and three polished brushed nickel, that screw into the tter.
Decorative shades are available in hand-blown glass, prismatic glass or metal. All decorative shades t
both tter styles.
Decorative shades sold separately (see shade ordering information on second page).
OPTICS
Each tter contains three 3000K high-performance LEDs which maintain 274 lumen output at 50,000-hour
life.
ELECTRICAL
LED driver is 120V and operates at 60Hz.
Fully dimmable down to 10%. Works with most standard incandescent dimmers. See chart on second page
for suggested dimmers.
INSTALLATION
Suspended mount from ceiling. Includes 78” of cable for tool-free mounting height adjustment. Excess cable
ts within canopy - no cutting necessary.
All mounting hardware included.
LISTINGS
CUL listed to U.S. and Canadian safety standards.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Dimensions
Bullet Fitter: Cylinder Fitter:
Canopy Width: 5” (12.7) Canopy Width: 4-1/2” (11.4)
Canopy Height: 1-7/8” (4.8) Canopy Height: 1-7/8” (4.8)
Fitter Width: 2-3/4” (7) Fitter Width: 2-5/8” (6.7)
Fitter Height: 2” (5.1) Fitter Height: 1-7/8” (4.8)
Both tter styles include 78” of cable for tool-free mounting height adjustment.
All dimensions are inches (centimeters).
MDP
Series
1
Finish
MDPB Bullet LED mini-pendant tter
MDPC Cylinder LED mini-pendant tter
BZ Bronze
BNP Polished Brushed Nickel
Notes
1 Glass shades must be ordered separately. See Shade Ordering Information.
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: MDPB BZ
See reverse side for decorative shade ordering information.
Model (see product images on back of sheet)
DRBL 1001 Ball shade in opal white nish DMCN BZ Metal cone shade in bronze nish DSCL 1010 Short cylinder shade in white drizzle nish
DRBL 1008 Ball shade in green melon nish DMCN BNP Metal cone shade in polished brushed nickel nish DSBL 1001 Small bell shade in opal white nish
DBEL 1001 Bell shade in opal white nish DCBL 1009 Concave bell shade in amber twist nish DTCL 1001 Tall cylinder shade in opal white nish
DBIL 1015 Billet shade in rain-drop nish DGDT 1003 Cylinder dot shade in frosted white nish DTCL 1005 Tall cylinder shade in apple red nish
DBLT 1001 Bullet shade in opal white nish DGWV 1003 Cylinder wave shade in frosted white nish DTCL 1009 Tall cylinder shade in amber twist nish
DBLT 1004 Bullet shade in caramel swirl nish DGNG 1007 Glass in glass shade in blue nish DTCL 1010 Tall cylinder shade in white drizzle nish
DCNE 1001 Cone shade in opal white nish DPRG 1011 Prismatic shade with clear ribbed glass DTRB 1014 Top rib shade in caramel mocha swirl nish
DCNE 1002 Cone shade in white melon nish DSCL 1001 Short cylinder shade in opal white nish DZNT 1003 Zentro shade in frosted white nish
DCNE 1006 Cone shade in cobalt blue nish DSCL 1005 Short cylinder shade in apple red nish DZNT 1007 Zentro shade in blue nish
DCNE 1008 Cone shade in green melon nish DSCL 1009 Short cylinder shade in amber twist nish
Example: DTCL 1005
SHADE ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Bullet Fitter
Cylinder Fitter
DECORATIVE INDOOR MDP
Catalog
Number
Notes
Type