Manualshelf

Cut Sheet

ManualsBrandsLithonia Lighting ManualsFixture Accessories4' Replacement Lens
12
Series
DM Damp
location
DMW Wet
location
For tandem double-
length unit, add prefix T.
Example: TDM
Voltage
120
277
347
MVOLT
4
Others
available
NOTES:
1 32W T8 lamps only.
2 Must use ACNS90 ballast.
3 Deep lens is standard on 8' fixtures.
4 MVOLT available with GEB10IS only.
5 Available with only 32 watt lamp types.
Options
ELDW Emergency battery pack (nominal 300
lumens)
EL5DW Emergency battery pack (nominal 500
lumens)
EL6DW Emergency battery pack (nominal 600
lumens)
EL14DW Emergency battery pack (nominal 1400
lumens)
GEB Electronic ballasts,
<20% THD
GEB10IS Electronic ballasts, <10% THD, Instant
Start
1
GEB10RS Electronic ballasts, <10% THD, Rapid
Start
6
GLR Internal fast-blow fuse
GMF Internal slow-blow fuse
RIF1 Radio interference filter, 1 per fixture
STSL Stainless steel latches
WLF Wet location fittings (1 pair, installed in
fixture top; DM still will be damp)
CSA CSA Certified (Only required for 347V)
NOM NOM Certified
BDP In-fixture ballast disconnect plug
Accessories
Order as separate catalog numbers.
BCD Bracket for hanger chain mounting. Two per
package.
HC36 Chain hangers (1 pair, 36" long). Requires BCD.
WLF Wet location fittings (1 pair, not installed).
Number of
lamps
1
2
3
1
Not included
Lamp type
32 32W T8 (48")
54 54W T5HO
(48")
2
Diffuser
(blank) Acrylic(15% DR)
AR High-impact
acrylic (50% DR)
DP Deep acrylic
3
ARDP Deep high-impact
acrylic
3
FEATURES & SPECIFICATIONS
INTENDED USE
Intended for low to medium mounting heights where dust, dirt, humidity,
moisture, or corrosive elements are present. Ideal for canopies, dock
areas, wastewater treatment, refrigerated areas, food processing and
other non-hazardous environments.
CONSTRUCTION
Housing formed from impact resistant, UV stabilized, fiberglass reinforced
polyester with cold-rolled steel enclosed wireway. Poured in gasketing
provides a seal between housing and diffuser. Captive, corrosion-resis-
tant cam-action latches secure the diffuser; six on 4’ units, and ten on 8’
units. Stainless steel latches available.
FINISH
Painted parts pretreated with a five-stage iron-phosphate process to en-
sure superior paint adhesion and corrosion resistance, then finished with
a high-gloss, baked white enamel.
OPTICAL SYSTEM
Acrylic diffuser with a stippled interior surface to spread lamp image. High-
impact diffuser optional.
ELECTRICAL SYSTEM
Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed and CSA
Certified ballast is standard. Sound rating depends on lamp/ballast combi-
nation.
AWM, TFN, THHN wire throughout, rated for required temperatures.
INSTALLATION
For unit or row installations, surface (ceiling or wall) or suspended mount-
ing.
LISTING
120V, 277V and MVOLT are UL Listed and CSA Certified (standard). 347V is
CSA Certified (see Options). NOM Certified (see Options). Suitable for wet
(DMW) or damp (DM) locations. Compliance to FDA/USDA requirements
and/or NSF splash-zone certification (DMW).
WARRANTY
Guaranteed for one year against mechanical defects in manufacture.
Enclosed and Gasketed Industrial
DM/DMW
PROGRAMMED
AND RAPID START
4' or 8' length
1, 2 or 3 lamps
Sheet #: DM-DMW-RS INFL-280
Fluorescent
Specifications
Length: 50" (1270)
98" (2489)
Width: 8-1/8" (206)
Fixture Depth: 5-5/8" (143)
All dimensions are inches (millimeters).
Specifications subject to change
without notice.
L
W
D
Catalog Number
Notes
Type
For shortest lead times, configure product using standard options (shown in bold).
Example: DMW 2 32 MVOLT GEB10IS
ORDERING INFORMATION

Summary of content (2 pages)