Specification

Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE  Intended for low to medium mounting heights where dust, dirt, humidity or
moisture are present. Ideal for canopies, dock areas, wastewater treatment, refrigerated areas, food
processing and other non-hazardous environments. Certain airborne contaminants can diminish
integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
CONSTRUCTION  Housing formed from impact resistant, UV stabilized, berglass reinforced polyes-
ter with cold-rolled steel enclosed wireway. Poured in place gasketing provides a seal between housing
and diuser. Captive, corrosion-resistant cam-action latches secure the diuser; six on 4’ units, and ten
on 8’ units. Stainless steel latches available.
Finish: Painted parts pretreated with a ve-stage iron-phosphate process to ensure superior paint adhe-
sion and corrosion resistance, then nished with a high-gloss, baked white enamel.
OPTICS  High-impact acrylic diuser with a stippled interior surface to spread lamp image.
PLEASE NOTE: The standard 4’ diuser is 2-1/4” deep, and the standard 8’ or 48T8HO diuser is 3” deep. To
order the 4’ diuser so that it matches the depth of the 8’ diuser, order the ARDP option. The 8’ diuser
is not available in the 2-1/4” depth.
ELECTRICAL  Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed and CSA Certied
ballast is standard.
AWM, TFN, THHN wire throughout, rated for required temperatures.
INSTALLATION  For unit or row installations, surface (ceiling or wall) or suspended mounting. Wall
mounting; horizontal orientation only for use in damp locations. Stainless steel surface spring-mounting
brackets standard (2 included).
LISTINGS  120V, 277V and MVOLT are UL Listed and CSA Certied (standard). 347V is CSA Certied
(see Options). NOM Certied (see Options). Listed for 25°C ambient and wet locations for covered-ceiling
applications. IP65 rated. Optional IP67 rating available (supplied with 8 latches on 4' units and 14
latches for 8' units; covered ceiling not required). Compliance to FDA/USDA requirements and/or NSF
splash-zone certication.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Note: Specications subject to change without notice.
All dimensions are shown in inches (centimeters) unless otherwise noted.
Enclosed and Gasketed Industrial
DMW
INSTANT, PROGRAMMED OR RAPID START
4' or 8' length
1, 2 or 3 lamps
DMW
Series
Number
of lamps Lamp type Diuser Voltage Ballast Options
DMW
Wet location
For tandem double-
length unit, add prex T.
Example: TDMW
1
1
2
3
2
28T5 28W T5 (48")
3
32 32W T8 (48")
48T8HO 44W T8HO (48")
54T5HO 54W T5HO (48")
4
96T8 59W T8 slimline
(96")
96T8HO 86W T8 380mA
(96")
(blank) 2-1/4" Deep
high-impact
acrylic (50%
DR)
ARDP 3" Deep high-
impact acrylic
(50% DR)
5
120
277
347
MVOLT
others
available
GEB10IS Elec-
tronic ballast,
≤10% THD,
instant start
GEB10RS Elec-
tronic ballast,
≤10%
THD,rapid
start
6
GEB10PS Electronic
ballasts,
≤10% THD,
programmed
rapid start
GEB10PS90 T5HO
90° case
temperature
ballast
ELDW Emergency battery pack (nominal 300 lumens)
7,8
EL5DW Emergency battery pack (nominal 500 lumens)
7,8
EL6DW Emergency battery pack (nominal 600 lumens)
7,8
EL14DW Emergency battery pack (nominal 1400 lumens)
7,8
GLR Internal fast-blow fusing
9
GMF Internal slow-blow fusing
9
RIF1 Radio interference lter, one per xture
STSL Stainless steel latches
WLF Wet location ttings (one pair; installed, top, for
use with 1/2" rigid conduit)
IP67 IP67 rated; requires 8 latches for 4' xtures and 14
latches for 8' xtures
CSA CSA certied (only required for 347V)
NOM NOM certied
CS89 6' white cord, 16/3, no plug, wet location
CS88 6' Brad Harrison 16/3 cord and straight blade plug
set wet location
9
MSI_ Wet location occupancy sensor pre-wired
9,10
DL Damp location
11
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: DMW 2 32 MVOLT GEB10IS
Notes
1 Not available with 96T8 or 96T8HO.
2 32W T8 and 28 T5 lamps only.
3 Must specify GEB10PS ballast.
4 Must specify GEB10PS90 ballast.
5 ARDP standard on 48T8HO and 8' xtures.
6 Available 347V T8 only.
7 Must specify voltage; 120 or 277V only.
8 Check battery pack spec sheet on
www.powersentrysafety.com for compatibility.
INDUSTRIAL DMW-FL
Accessories: Order as separate catalog number.
BCD Bracket for hanger chain mounting. Two per package
12
HC36 Chain hangers (1 pair, 36" long); Requires BCD
WLF Wet location ttings (1 pair, not installed, for use with
1/2" rigid conduit)
DMW/VRISMB Surface mounting brackets (pair)
13
L
W
D
Specications
Length: 50 (127.0)
98 (248.9)
Width: 8-1/8 (20.6)
Fixture depth: 5-5/8 (14.3) (deep lens)
4-3/4 (12.1) (standard lens)
9 Must specify voltage. Not available with MVOLT.
10 For mounting up to 8' specify MS18; for mounting up
to 20' specify MS120.
11 DL option required for battery packs, sensors, and
cord sets that are not wet location listed.
12 For stainless steel, specify STS (ex: BCD STS).
13 Brackets ship standard with xture. For replacement
purposes only.