Specification

EMERGENCY ELT-CHICAGO
Catalog
Number
Notes
Type
Series Options
ELT24C
EL
T36C
AM Ammeter
VM Voltmeter
RO Less lamp heads
H 8W halogen lamps
LD Load disconnect switch
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELT24C LD
FEATURES & SPECIFICATIONS
CONSTRUCTION
18-gauge steel housing nished in instrument tan color.
Hinged faceplate for easy maintenance.
Metal lamp heads with two 12-watt tungsten halogen, glass sealed-beam PAR36 lamps.
Dual-voltage input capability (120 or 277 volts)
ELECTRICAL
Current-limiting charger maximizes battery life and minimizes energy consumption. Provides low
operating costs.
Yellow AC "on" light.
Battery: Maintenance-free lead-calcium battery provides 24 watts (ELT24C) or 36 watts (ELT36C) rated
capacity for two hours.
24-hour battery recharge after 90-minute discharge.
Test switch and dual function ready/charge light (green) permit check of system operation.
Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery.
Slip-on battery terminals.
LISTINGS
UL listed. Meets UL 924, NFPA 101-1988 (current Life Safety Code), NEC and OSHA illumination standards.
ELT24C and ELT36C are approved for use in the city of Chicago (9717-E).
WARRANTY — 3-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Note: Specications subject to change without notice.
Industrial Steel Emergency Lighting
ELT24C/ELT36C
Lead-Calcium Battery
NOTES:
1 See spec sheet ELA-WG.
2 See spec sheet ELA-RTLP-MS-VS2.
Accessories
Order as separate catalog number.
ELA WG2 Wire guard
1
ELA MSTS Mounting shelf
2