Installation Guide

Luminaire Variant
FMML (dry/damp location) – Cat. No. FMML 13 840
FMML with WL option (wet location) – Cat. No. FMML 13 840 WL
These installation instructions are used for installing the following luminaires and kits
Identification of the flush mount luminaire and parts…..………………………………… Page 1
Installation of the gasket (wet location version only) .…………………………...………..Page 2
Installation of the luminaire ……………………...…….…………………....…………..…. Page 2
A) Identification of the Luminaire
Versi Lite LED Flush Mount
INSTALLATION INSTRUCTIONS
U990103 Rev. B
Page 1
© Acuity Brands Lighting, Inc. 2015
All Rights Reserved.
Metal fixture
body
Acrylic twist
off diffuser
Hardware
bag parts
If assistance is required, contact technical
support at [phone]
Suggested Dimmers
This fixture is designed to operate with most standard Triac Based (Forward Phase-Control or Leading Edge) dimmers and
is not compatible with 0-10v dimming systems. Noted below is a listed of dimmers that have been tested with this fixture.
This list of dimmers does not imply any guarantee or warranty of compatibility with a particular application. Dimmers that
are not listed do not imply non-compatibility.
• Lutron: DVELV 300P, Skylark 300P, NTELV 300, NLV 600
• Leviton: 6633P, IPL06, 6674P, IPE04,6683
• Synergy: ISD 600I 120
• Pass & Seymour HCL453PTCCCV6