Installation Guide

ManualsBrandsLithonia Lighting ManualsCommercial LightingJEBL 136-Watt Matte White Integrated LED Round High Bay Light



LEDIMPORTANTSAFETYINSTRUCTIONS



 Toreducetheriskofdeath,personalinjuryorpropertydamagefromfire,electricshock,fallingparts,cuts/abrasions,and

otherhazardspleasereadallwarningsandinstructionsincludedwithandonthefixtureboxandallfixturelabels.

 Beforeinstalling,servicing,orperformingroutinemaintenanceupon

thisequipment,followthesegeneralprecautions.

 Installationandserviceofluminairesshouldbeperformedbyaqualifiedlicensedelectrician.

 Maintenanceoftheluminairesshouldbeperformedbyperson(s)familiarwiththeluminaires’constructionandoperation

andanyhazardsinvolved.Regularfixturemaintenanceprogramsarerecommended.

 Itwill

occasionallybenecessarytocleantheoutsideoftherefractor/lens.Frequencyofcleaningwilldependonambient

dirtlevelandminimumlightoutputwhichisacceptabletouser.Refractor/lensshouldbewashedinasolutionofwarm

waterandanymild,non‐abrasivehouseholddetergent,rinsedwithcleanwaterand

wipeddry.Shouldopticalassembly

becomedirtyontheinside,wiperefractor/lensandcleaninabovemanner,replacingdamagedgasketsasnecessary.

 DONOTINSTALLDAMAGEDPRODUCT!Thisluminairehasbeenproperlypackedsothatnopartsshouldhavebeen

damagedduringtransit.Inspecttoconfirm.Anypartdamagedor

brokenduringorafterassemblyshouldbereplaced.

 Recycle:ForinformationonhowtorecycleLEDelectronicproducts,pleasevisitwww.epa.gov. 

 Theseinstructionsdonotpurporttocoveralldetailsorvariationsinequipmentnortoprovideeverypossiblecontingency

tomeetinconnectionwithinstallation,operation,ormaintenance.Shouldfurtherinformationbedesiredorshould

particularproblemsarisewhicharenotcoveredsufficientlyforthepurchaser’sorowner’spurposes,this

mattershouldbe

referredtoAcuityBrandsLighting,Inc.



READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION



 Disconnectorturnoffpowerbefore

installationorservicing.

 Verifythatsupplyvoltageiscorrectby

comparingitwiththeluminairelabel

information.

 Makeallelectricalandgrounded

connectionsinaccordancewiththeNational

ElectricalCode(NEC)andanyapplicable

localcoderequirements.

 Allwiringconnections

shouldbecapped

withULapprovedrecognizedwire

connectors.

WARNING

RISKOFELECTRICSHOCK



 Allowlamp/fixturetocoolbeforehandling.

Donottouchenclosureorlightsource.

 Followallmanufacturer’swarnings,

recommendationsandrestrictionsfor:driver

type,burningposition,mounting

locations/methods,replacementand

recycling.





WARNING

RISKOFBURN



 Wearglovesandsafetyglassesatalltimes

whenremovingluminairefromcarton,

installing,servicingorperforming

maintenance.

 Avoiddirecteyeexposuretothelightsource

whileitison.

CAUTION

RISKOFINJURY



 Keepcombustibleandothermaterialsthat

canburn,awayfromlamp/lens.

 Donotoperateincloseproximityto

persons,combustiblematerialsor

substancesaffectedbyheatordrying.



CAUTION

RISKOFFIRE

Summary of content (4 pages)

PAGE 1
LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION         To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box and all fixture labels.
PAGE 2
LED IMPORTANT SAFETY INSTRUCTIONS CAUTION: RISK OF PRODUCT DAMAGE  Never connect components under load.  Do not mount or support these fixtures in a manner that can cut the outer jacket or damage wire insulation.  Unless individual product specifications deem otherwise: Never connect an LED product directly to a dimmer packs, occupancy sensors, timing devices, or other related control devices. LED fixtures must be powered directly off a switched circuit.
PAGE 3
JEBL Round High Bay Luminaire 1 Introduction 1.1 Product Description. The JEBL luminaires have been designed and tested in accordance with applicable UL/CSA standards and are suitable for use in wet locations. Max luminaire weight is 14 lbs. 1.2 Remove the new LED high bay from packaging and inspect for any damages. Handle new LED fixture with care. If damaged do not use; call your local rep for replacement.
PAGE 4
2.2.1 Surface Mount Bracket (JEBLSMB) - The optional Surface Mount Bracket is designed to attach to JEBL fixture housing with supplied mounting screws. 2.2.2 Remove hole plugs from bracket mounting surface. (See Figure 2) 2.2.3 Position Mounting Bracket onto fixture housing aligning mounting holes with holes on housing. Install provided mounting screws, lock washers and washers to attach Mounting Bracket to fixture housing. (See Figure 2). 2.2.