Cut Sheet

ManualsBrandsLithonia Lighting ManualsIndoor Lighting - Recessed4" IC/Non-IC Housing, Air-Tite

Speciﬁcations

Height: 5-1/2 (14.0)

Length: 10-1/8 (25.7)

Width: 5-3/4 (14.6)

Ceiling opening: 4-1/4 (10.8)

Ceiling cutout template: 4.01

All dimensions are inches (centimeters) unless otherwise speciﬁed.

5-3/4

(14.6)

10-1/8

(25.7)

5-1/2

(14.0)

4-1/4

(10.8)

4-1/2

(11.4)

FEATURES & SPECIFICATIONS

INTENDED USE — Recessed housing rated IC or Non-IC. For remodel construction only.

Approved for factory assembled wiring only.

Approved for direct burial in insulation.

CONSTRUCTION — Air-tight standard. Tested to meet current energy codes.

Aluminum housing with three remodel clips for installation in existing plaster, sheet rock or mechanical

ceiling.

Heavy-gauge galvanized steel raceway arm.

Galvanized steel junction box with four built-in Romex clamps. Five 1/2" knockouts with slots for pryout.

Not suitable for pulling wires.

Rated for 90° C.

Ground wire provided.

Removable J-box doors for easy access.

ELECTRICAL — Durable medium base porcelain socket with nickel-plated copper alloy screw shell

and contact.

Socket clips to top of housing to prevent paint overspray in socket screw shell.

Socket attaches to reﬂector to ensure proper and consistent lamp position.

Thermal protection provided against improper lamp usage.

120 volt only.

INSTALLATION — Air-tight housing suitable for air-tight installations. Refer to energy codes for proper

installations.

2x8 and 2x6 existing ceiling or T-bar ceiling panel installation.

Clip adjustment on housing (max. 5/8” and min. 1/2") allows for ﬂush mounting with ceiling face.

LISTINGS — UL Listed to US and Canadian safety standards. Damp location listing (See trim selection

for wet location listing).

WARRANTY — 1-year limited warranty. Complete warranty terms located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may diﬀer as a result of end-user environment and application.

Speciﬁcations subject to change without notice.

L3R

Series Options Packaging

L3R

Shipped installed in ﬁxture

PHC Poke-home wire connector

R6 Resale pack of six

U Unit

ORDERING INFORMATION

For shortest lead times, conﬁgure product using bolded options.

Example: L3R R6

4" Remodel Housing

L3R

INCANDESCENT

IC/Non-IC

Remodel Construction

Notes

See trim summary on reverse side for maximum wattages.

Accessories: Order as separate catalog number.

ATK3 R6 Airtight trim kit

DOWNLIGHTING L3R

Catalog

Number

Notes

Type

Summary of content (3 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — Recessed housing rated IC or Non-IC. For remodel construction only. Type Approved for factory assembled wiring only. Approved for direct burial in insulation. 4" Remodel Housing CONSTRUCTION — Air-tight standard. Tested to meet current energy codes. Aluminum housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceiling. L3R Heavy-gauge galvanized steel raceway arm.
PAGE 2
L3R 4" Remodel Housing Description Catalog number Maximum wattage1 General/Task Open Narrow Flange 3O1 White 3O1MW Matte white 3O1A Clear diffuse, white plastic flange 3O1A PFMW Clear diffuse, matte white plastic flange 3O1AZ Clear specular anodized 3O1BLZ Black specular anodized 3O1BN Brushed nickel 3O1ORB Oil-rubbed bronze IC 30 R20 35 PAR20 Non IC 50 PAR20 3B1 3B1 TRMW 3B1BN 3B1ORB Maximum wattage1 IC 35 PAR20 Non IC 50 PAR20 Baffle Deep Narrow Flange 3B2 Black Non IC IC
PAGE 3
L3R 4" Remodel Housing ORDERING INFORMATION D I LED Gimbal Module (Damp location) Example: 4G1MW LED L3R1 For shortest lead times, configure product using bolded options. 4G1 LED Series/Finish Lamps Series 4G1 4" Gimbal module LE MAB M Finish MW MB BN ORB Voltage CCT / CRI / W / Lumens1 LED (blank) 27K 90CRI 30K 90CRI 40K 90CRI Matte white Matte black Brush nickel Oil-rubbed bronze (blank) 3000k / 83CRI / 7.9W / 435L 2700K / 91CRI / 8.3W / 480L 3000K / 93CRI / 7.