Specification
Catalog
Number
Notes
Type
Compact Fluorescent Downlighting
8" LF8N
OPEN REFLECTOR
Horizontal 2-Lamp, Triple Tube (TRT)
Specifications
Max. height: 6-3/8 (16.2)
Ceiling opening: 8-3/4 (22.2)
Overlap trim: 9-1/2 (24.1)
Length: 15 (38.1)
Width: 13-7/8 (35.2)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for a wide variety of low- to medium-height ceiling applications including
commercial, retail and hospitality spaces where an open or damp location lensed xture is required.
CONSTRUCTION — Heavy gauge die formed galvanized steel mounting frame with mechanical
trim retention (yoke) ensures secure and ush reector mounting to ceiling. Attached to frame are
vertically adjustable mounting brackets for use with C channels, ½” steel conduit or 16 gauge at bar
hangers included, standard. Frames equipped with galvanized junction box UL Listed for through wire
applications. Junction boxes equipped with (2) ¾” and (4) ½” conduit knockouts with pryout slots and
removable access doors.
Maximum 1-1/2” ceiling thickness.
OPTICS — Aluminum full reectors are optically designed to maximize lumen output and to provide
superior glare control. Anodized nishes for open reectors are semi-specular or diuse in a variety of
colors. Polyester powder coat nishes also are available in white.
Lenses are available in clear at glass, tempered prismatic glass or polycarbonate to provide optimal
visual comfort and improved aesthetics. Lens is recessed 1-3/4 (4.4) from ange.
ELECTRICAL — Electronic ballast with end of lamp life protection standard. Class P thermally protected
ballast protects against improper contact with insulation. Minimum starting temperature is 0°F/-18°C.
Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire.
Ground wire provided.
Lamp Socket Base:
TRT 4-pin lamps – 26W (GX24Q-3); 32W (GX24Q-3); 42W (GX24Q-4)
LISTINGS — Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, damp location,
and to U.S. and Canadian Safety Standards.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Notes
1 Not available with ECOS or WLP.
2 Electronic multi-volt ballast capable of operating any line voltage from 120-277V, 50 or 60Hz.
3 Not available with EL or ELR.
4 For additional options see www.lithonia.com.
5 Ships standard for 1-lamp operation. For 2-lamp emergency operation, consult installation
instructions or factory. Add 3” (7.6) to width and 4-1/2” (11.4) to length.
6 Not recommended for eld installation.
DOWNLIGHTING LF8N-OPEN-2-TRT
Accessories: Order as separate catalog number.
SCA8 Sloped ceiling adaptor. Degree of slope must be
specied (10D, 15D, 20D, 25D, 30D) Ex: SCA8 10D.
CTE8 Ceiling thickness extender is used when ceiling
thickness is greater than 1-1/2 (3.8). Maximum
thickness 2 (5.1).
LF8N
Series Wattage/Lamp Reector/Color Lens type Voltage Options
4
LF8N 2/26-42TRT
1
2/26TRT
2/32TRT
2/42TRT
F8O3 White open
F8O3A Clear diuse open
F8O3AZ Clear semi-specular
open
F8O3G Gold diuse open
F8O3GZ Gold semi-specular
open
F8O3PR Pewter diuse open
F8O3WTZ Wheat semi-specular
open
(blank) No lens
CGL Clear glass lens
T73 Tempered glass
prismatic lens
PCL Clear polycarbonate
lens
MVOLT
2
120
277
347
3
ADEZ Advance Mark 10™ electronic dimming ballast, 120V or 277V. Must be
voltage specic. Minimum dimming level 5%
ECOS Lutron EcoSystem electronic dimming ballast, 120V - 277V. Must be
wattage specic. Minimum dimming level 5%
EL Emergency PSDL3 DL battery pack with integral test switch. Lens
removal required before EL testing
5
ELR Emergency PSDL3 DL battery pack with remote test switch
5
ELRHL2LP Iota I-162 Emergency battery pack with remote test switch. Operates
two 26W, two 32W or two 42W CFL lamps in emergency mode with bat-
tery back-up in case of power disruption. Average output is 2600 lumens
for two 26W lamps; average output is 2750 lumens for two 32W lamps;
average output is 2800 lumens for 42W lamps
6
GMF Single slow-blow fuse, must specify voltage
BDP Ballast disconnect plug (meets codes that require in-xture disconnect)
3
WLP 35K lamp (shipped separately)
TRW White ange
RIF1 Radio interference lter
LBH Less barhangers
ORDERING INFORMATION
For shortest lead times, congure product using bolded options.
Example: LF8N 2/26-42TRT F8O3AZ MVOLT
6-3/8
(16.2)
9-1/2
(24.1)
13-7/8
(35.2)
15
(38.1)
6-3/8
(16.2)
9-1/2
(24.1)
7-7/8
(19.7)