Specification

ManualsBrandsLithonia Lighting ManualsLighting3 in. GU10 White Gimbal Recessed Kit

Recessed Downlighting

LK3G

3” Gimbal Recessed Kit

Non-IC

Remodel Construction

FEATURES & SPECIFICATIONS

INTENDED USE

Recessed kits include housing, trim, lamp and wire connectors in one package. Rated Non-IC for use in remodel

applications. Approved for all ceiling and wiring types.

CONSTRUCTION

Steel housing with four remodel clips for installation in existing plaster, sheet rock or mechanical ceiling.

Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust. Easily converts to new

construction application using accessories (sold separately).

Galvanized steel junction box with ve 7/8” knockouts with slots for pryout. Not suitable for pulling wires.

Hook & hang snap-on J-box doors for easy access.

Rated for 90° C. Ground wire provided.

OPTICS

Gimbal trim utilizes an MR16 GU10 line voltage lamp projecting 30-degree beam spread for smooth

distribution.

ELECTRICAL SYSTEM

Includes (1) MR16 GU10 50W lamp, maximum wattage. Socket attaches to reector to ensure proper and

consistent lamp position. Thermal protection provided against improper lamp usage. 120 volt only.

Compatible with standard incandescent dimmers.

LISTINGS

CSA Certied to US and Canadian safety standards. Damp location listed.

WARRANTY

1-year limited warranty (excludes lamp). Complete warranty terms located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Actual performance may dier as a result of end-user environment and application.

Note: Specications subject to change without notice.

Series Finish Lamps Voltage

LK3G 3” gimbal recessed kit

MW Matte white

BN Brushed nickel

ORB Oil-rubbed bronze

(blank) 50W (blank) 120V

ORDERING INFORMATION

For shortest lead times, congure products using bolded options.

Example: LK3GMW

LKABH

Hanger Bars

LK3AP

New Construction Pan

Accessories: Order as separate catalog number.

LK3AP 3” new construction pan

LKABH Hanger bars for conversion to new construction

3-1/10”

(7.9)

7-1/8”

(18.1)

6”

(15.2)

4”

(10.2)

All dimensions are inches (centimeters).

Specications

Aperture: 3” (7.6)

Ceiling opening: 3-1/10” (7.9)

Overlap trim: 4” (10.2)

Height: 6” (15.2)

Length: 7-1/8” (18.1)

RECESSED DOWNLIGHTING LK3G

Catalog

Number

Notes

Type

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS Type INTENDED USE Recessed kits include housing, trim, lamp and wire connectors in one package. Rated Non-IC for use in remodel applications. Approved for all ceiling and wiring types. Recessed Downlighting LK3G CONSTRUCTION Steel housing with four remodel clips for installation in existing plaster, sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust.
PAGE 2
3” Gimbal Recessed Downlighting Kit PHOTOMETRICS For MR16 GU10 reflector lamps, see lamp manufacturer’s published raw data for photometrics. INSTALLATION The following instructions are for remodel applications. New construction applications require new construction pan and hanger bars (see accessories). Step 1: Using provided stencil, trace cutout lines for housing hole on ceiling. Use saw to make appropriate 3-1/10” cutout.