Instructions / Assembly

3” Gimbal Recessed Downlighting Kit
The following instructions are for remodel applications. New construction applications require
new construction pan and hanger bars (see accessories).
INSTALLATION
Step 3:
Snap (3) springs to secure housing to ceiling.
Step 1:
Using provided stencil, trace cutout lines for
housing hole on ceiling. Use saw to make
appropriate 3-1/10” cutout.
Step 2:
Using provided wire connectors, connect wires
(black to black; white to white; ground to
ground) and insert housing into ceiling.
Step 4:
Insert trim into housing, and screw in lamp.
For MR16 GU10 reector lamps, see lamp manufacturer’s published raw data for photometrics.
PHOTOMETRICS
LK3G
RECESSED DOWNLIGHTING One Lithonia Way Conyers, GA 30012 Phone: [phone] Fax: [phone] www.lithonia.com © 2011-2014 Acuity Brands, Inc. All rights reserved. Rev. 09/15/14