Specification

ManualsBrandsLithonia Lighting ManualsOther5 in. Matte White Recessed Gimbal Integrated LED Lighting Kit

LED Recessed Downlighting

LK5G

5" Gimbal LED Recessed Kit

IC/Non-IC

New & Remodel Construction

FEATURES & SPECIFICATIONS

INTENDED USE — Recessed LED kits include housing, trim, and wire connectors in one package. The LED

kit is the most economical means to create a well lit environment with exceptional energy eﬃciency and

near zero maintenance. The LED kit maintains at least 70% light output for 35,000 hours.

CONSTRUCTION — Steel housing with 3 remodel clips and 3 wire nuts for installation in existing plaster,

sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat

paint prevents rust. Easily converts to new construction application using accessories (sold separately).

Galvanized steel junc tion box with three 7/8" knockouts with slots for pryout. Not suitable for pulling wires.

Hook & hang snap-on J-box doors for easy access.

Rated for 90°C. Ground wire provided.

Available in 3000 K or 5000 K color temperature LEDs.

OPTICS — White gimbal recesses optical system into the ceiling to prevent glare and provide a traditional

look. Diﬀused lens provides even illumination throughout the space.

ELECTRICAL — High-eﬃciency driver mounted on the module. Primary power disconnect provided for

simple connection to a dedicated LED connector in the housing.

Dimming down to 15%. See page 2 for recommended triac dimmers.

Standard input wattage is 10.6W, 67 lumens per watt (3000 K), 10.2W, 84 lumens per watt (5000 K);

equivalent to 50 watt PAR20.

LISTINGS — CSA certiﬁed for use in the US and Canadian safety standards. California T24 compliant.

ENERGY STAR® qualiﬁed. WSEC ASTM E283 for Air-Tight. Damp location listed.

WARRANTY — 3-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

LK5GMW LED

Series Reﬂector Finish Lamps Color temp/CRI/Watts/Lumens Voltage

LK5 5" LED recessed kit G Gimbal MW Matte white LED (blank) 3000 K/93CRI/10.6W/720L

50K 5000 K/95CRI/10.2W/856L

(blank) 120V

Accessories: Order as separate catalog number.

LKA5P 5" new construction pan

LKABH Hanger bars for conversion to new construction

ORDERING INFORMATION

For shortest lead times, conﬁgure products using bolded options.

Example: LK5GMW LED

LKABH

Hanger bars

LKA5P

New construction pan

DOWNLIGHTING LK5GLED_GEN4

All dimensions are inches (centimeters) unless otherwise indicated.

(12.7)

(22.9)

(15.2)

6-1/4

(15.9)

Speciﬁcations

Aperture: 5 (12.7)

Ceiling opening: 5-1/2 (14)

Overlap trim: 6-1/4 (15.9)

Height: 6 (15.2)

Length: 9 (22.9)

Catalog

Number

Notes

Type

Summary of content (3 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — Recessed LED kits include housing, trim, and wire connectors in one package. The LED kit is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. The LED kit maintains at least 70% light output for 35,000 hours. Type CONSTRUCTION — Steel housing with 3 remodel clips and 3 wire nuts for installation in existing plaster, sheet rock or mechanical ceiling.
PAGE 2
5" Gimbal LED Recessed Downlighting Kit INSTALLATION The following instructions are for remodel applications. New construction applications require new construction pan and hanger bars (see accessories). 5- / 1 2 Step 1: Using provided stencil, trace cutout lines for housing hole on ceiling. Use saw to make appropriate 5-1/2" cutout. Step 2: Using provided wire connectors, connect wires (black to black; white to white; ground to ground) and insert housing into ceiling.
PAGE 3
5" Gimbal LED Recessed Downlighting Kit LIGHTING FACTS PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30" Above Floor for a Single Luminaire LK5GMW LED , 30K, input watts: 10.8, delivered lumens: 710, LM/W = 66, tested in accordance with IESNA LM 63-1995 80° 60° 40° 200 0° 0 5 15 25 35 45 55 65 75 85 90 Ave Lumens 210 209 20 197 55 175 80 144 89 106 82 68 61 36 36 12 13 1 2 0 Zone Lumens % Lamp 0° - 30° 155.5 35.1 0° - 40° 245.0 55.