Specification

Catalog Number
Notes Type
FEATURES & SPECIFICATIONS
INTENDED USE
Ideal for a wide variety of low- to medium-height ceiling applications including com-
mercial, retail and hospitality spaces where a baffled fixture is required.
CONSTRUCTION
Utilizes an extruded socket housing that attaches to the reflector via key hole
mount, which provides superior heat dissipation and extended lamp life. Socket
housing also adjusts to accommodate varying lamp lengths.
Heavy-gauge, die-formed galvanized steel mounting frame. Attached to frame are
vertically adjustable mounting brackets for use with C channels, ½” steel conduit or
16-gauge flat bar hangers included, standard. Frames are equipped with galvanized
junction box UL Listed for through-wire applications. Junction boxes equipped with
(2) ¾” and (4) ½” conduit knockouts with pryout slots and removable access doors.
Reflector clips packed with reflector for installation on rough-in.
Maximum 1-1/2” ceiling thickness.
OPTICS
Aluminum full reflectors are optically designed to maximize lumen output and to
provide superior glare control. The black or white baffled reflectors have a semi-
specular upper finish with white painted flange standard.
ELECTRICAL
Electronic ballast with end of lamp life protection standard. Class P thermally
protected ballast protects against improper contact with insulation. Minimum
starting temperature is 0°F/-18°C.
Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire.
Ground wire provided.
Lamp Socket Base:
DTT 4-pin lamps – 13W (G24Q-1); 18W (G24Q-2); 26W (G24Q-3)
TRT 4-pin lamps – 13W (GX24Q-1); 18W (GX24Q-2); 26W & 32W (GX24Q-3);
42W (GX24Q-4)
LISTINGS
Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, damp
location, and to U.S. and Canadian Safety Standards.
Compact Fluorescent Downlighting
6” LP6FN
BAFFLE
Vertical 1-Lamp, Double Twin-Tube (DTT) or
Triple-Tube (TRT)
All dimensions are inches (centimeters).
Specifications
Max. height: 10-3/4 (27.3)
Ceiling opening: 7 (17.8)
Overlap trim: 7-1/2 (19.1)
Length: 13 (33.0)
Width: 11 (27.9)
Downlighting and Track Sheet #: LP6FN-BAFFLE
For shortest lead times, configure product using standard options (shown in bold).
Example: LP6FN 26-42TRT 6B9 MVOLT
ORDERING INFORMATION
Series
LP6FN
LP6FN
Wattage/lamp
13DTT
1
18DTT
26DTT
13TRT
1
18TRT
26-42TRT
2
26TRT
32TRT
42TRT
Voltage
MVOLT
4
120
277
347
5
Options
9
ADEZ Advance Mark 10™ electronic dimming ballast, 120V or
277V. Must be voltage specific. Minimum dimming level 5%
ECOS Lutron EcoSystem electronic dimming ballast, 120V - 277V.
Must be wattage specific. Minimum dimming level 5%
EL Emergency PSDL3 DL battery pack with integral
test switch
6
ELR Emergency PSDL3 DL battery pack with remote
test switch
6
ELHL Iota I-420-R High lumen output emergency battery pack. In-
ternal test switch provided. Maximum average lumen output
is 1300 (42W)
7
ELRHL Iota I-420-EM-B High lumen output emergency battery
pack. Remote test switch provided. Maximum average
lumen output is 1300 (42W)
7
GMF Single slow-blow fuse, must specify voltage
BDP Ballast disconnect plug (meets codes that require in-
fixture disconnect)
5
RIF1 Radio interference filter
LBH Less barhangers
NSD Sensor Switch nLight™ dimming relay
8
WLP 35K lamp (shipped separately)
Reflector/color
3
6B9 Black baffle
6B9W White baffle
NOTES:
1 Not available with ADEZ or ECOS.
2 Not available with ECOS or WLP.
3 White painted flange standard.
4 Electronic multi-volt ballast capable of operating
any line voltage from 120-277V, 50 or 60Hz.
5 Not available with EL or ELR.
6 Add 3” (7.6) to width and 4-1/2” (11.4) to length.
7 Not recommended for field installation.
8 One 5A relay with one 0-10 VDC dimming output,
shipped installed. Requires additional nLight bus
power supply.
9 For additional options see lithonia.com.
Accessories
Order as separate catalog number
SCA6 Sloped ceiling adaptor. Degree of slope
must be specified (10D, 15D, 20D, 25D,
30D) Ex: SCA6 10D.
CTE6 Ceiling thickness extender is used when
ceiling thickness is greater than 1-1/2
(3.8). Maximum thickness 2 (5.1).
10-3/4
(27.3)
7-1/2
(19.1)
11
(27.9)
13
(33.0)
7-1/2
(19.1)
6-1/4
(15.9)
10-3/
4
(27.3)