Specification

ManualsBrandsLithonia Lighting ManualsOtherMeshback 1-Light White LED Track Lighting Head

DECORATIVE TRACK LIGHTING LTHMSBK MR16 HEAD-LED

Decorative Track Lighting

LTHMSBK MR16GU10 LED

Mesh Back Track Head

MR16GU10 LED Lamp

FEATURES & SPECIFICATIONS

INTENDED USE

This fresh and innovative track head combines aesthetics with superior functionality for applications such

as specialty retail, grocery, galleries, museums, hospitality, residential and educational environments.

Paired with an MR16 GU10 LED lamp, the track head provides high-quality, eco-friendly lighting solutions.

CONSTRUCTION

Lamp Holder: Multi-directional die-cast aluminum "Mesh Back" design using MR16GU10 LED lamps

(included) to shed light in desired areas.

Tilt: 60 degrees

Pan: 350 degrees

Adaptor: Low-proﬁle injection-molded track mounting adaptor compatible with Lithonia Lighting track

series (LTS), Cooper Lighting Halo® “H” L641 and L651 Track. Snap lock secures adaptor to track.

Note: Lithonia Decorative Track Lighting components are not compatible with Lithonia

Commercial Track Lighting components. Installation of mixed components will result in

risk of shock hazard or ﬁre, damage of ﬁxture, failure to illuminate, and it does not meet

UL standards.

Rated Life: 22.8 years based on 3 hours per day.

Lumen Output: 300 lumens, 4.5W

Color Temperature (CCT): 2700 K

CRI: 80

ELECTRICAL

MR16 LED lamp uses GU10 base 12V porcelain bipin twist lock socket. 120 VAC 60Hz.

Lamp included.

LISTINGS

ETL

listed to UL1574 Track Lighting Standard.

Dry location.

WARRANTY

3-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

Speciﬁcations

Width Length

Maximum

height

2-1/4 3-3/8 6-3/8

All dimensions are inches (centimeters) unless otherwise indicated.

Series LED, Lumen output Color temperature Finish

LTHMSBK LED lamp "Mesh Back" track head MR16GU10 LED 4.5W, 300 lumens 27K 2700K MW Matte white

DBL Matte black

ORDERING INFORMATION

All conﬁgurations of this product are considered “standard” and have short lead times.

Example: LTHMSBK MR16GU10 LED 27K DBL

Catalog

Number

Notes

Type

Replacement lamp

*232UVK - RK1 300L MR16GU10 27K LAMP

Summary of content (3 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS Type INTENDED USE This fresh and innovative track head combines aesthetics with superior functionality for applications such as specialty retail, grocery, galleries, museums, hospitality, residential and educational environments. Paired with an MR16 GU10 LED lamp, the track head provides high-quality, eco-friendly lighting solutions.
PAGE 2
LTHMSBK MR16GU10 LED Lamp Track Head PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire LTHMSBK DBL, 2700 K LEDs, input watts: 4.5, delivered lumens: 352, LM/W = 78, test no. LTL28658, tested in accordance with IESNA LM 79-08 60° 200 40° 0° 0 5 15 25 35 45 55 65 75 85 90 Zone Lumens % Lamp 0° - 30° 190.8 56.0 0° - 40° 254.8 74.8 0° - 60° 321.6 94.4 0° - 90° 340.7 100.0 90° - 180° 0.0 0.
PAGE 3
LTHMSBK MR16GU10 LED Lamp Track Head TRACK ACCESSORIES Live End Conduit Floating Feed Connects to the end of the linear track section supplying power from a conduit feed. Permits track to be wired anywhere along track length. Series Finish Series Finish LTLECF (blank) LTFC (blank) Matte white connector with black cover Matte white connector with black and white cover L Connector Live End Junction Box Feed Joins two track sections to make a 90° angle.