Installation Sheet

INSTALLATION INSTRUCTIONS
LITHONIA TRACK LINE VOLTAGE FIXTURES
FEATURES:
1. Fixture heads are multi-directional.
DOWNLIGHTING & TRACK SYSTEMS
ONE LITHONIA WAY, CONYERS, GEORGIA 30012, TELEPHONE [phone], FAX [phone]
www.lithonia.com IN CANADA: 1100 50TH AVE., LACHINE, QUEBEC H8T 2V3
2. Uses 120V, GU10 shielded 50W bulbs or GU10 LED 25W Max bulbs (Included).
or GU10 LED
25W Max bulbs
3. Designed for mounting to ceilings.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please visit www.lightahome.com for customer support
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
Ladder
Safety
Goggles
Gloves
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire
Cutters
x1 GU10 Halogen
50watt bulbs
x1 Mounting bracket
Assembly
x2 screws
x3 x1 Suction cup or Installer Wire Connectors
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
Make sure power is turned off at the electrical panel box before beginning your installation. Turning the power
off at the wall switch is not sufficient to prevent electrical shock
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
1. Read all instructions prior to beginning the installation process.
2. Do not install this lighting system in a wet location.
3. Lighted lamp is HOT!
4.
CAUTION - HOT SURFACE. Keep away from curtains and other combustible materials.
5. Do not touch bulb, lens, guard or enclosure at any time. Use a soft cloth. Oil from skin may damage
lamp.
6.
CAUTION - To reduce the risk of fire, use only 50W Max type GU10 shielded bulbs or 25W Max GU10 LED bulbs.
7. All electrical connections must be in accordance with local codes and the National Electrical Code. If you are unfamiliar
with methods of installing electrical wiring, secure the services of a qualified licensed electrician.
8. These fixtures are intended to be mounted to a 4” square x 2-1/8
” deep metal octagon outlet box. The box must be directly
supported by the building structure.
9. Before starting the installation, disconnect the power by turning off the circuit breakeror by removing the appropriate fuse at
the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock.
SAVE THESE INSTRUCTIONS
2/10