Specification Sheet
LTKSTBF BR30 KIT-LED
DECORATIVE TRACK LIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-533-7728 Fax: 855-209-6364 www.lithonia.com © 2013-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/01/14
LTKSTBF BR30 LED Lamp Step Bae Track Kit
LED LAMP AND DIMMER COMPATIBILITY
Mfg Cat No. Dimming Method Wattage Comments
Acuity Brands-Sensor Switch nLight NSP5 PCD 2W Forward Phase
Acuity Brands-Synergy ISDELV400120WH ISDELV400120WH 400W
Acuity Brands-Synergy SYPMB 6D Line voltage Module Forward Phase
Crestron CLX-1DIM4 Reverse Phase Adjust low end trim
Crestron CLX-1DIM8 Reverse Phase Adjust low end trim
Crestron CLX-2DIM2 Reverse Phase Adjust low end trim
Crestron CLX-2DIM8 Reverse Phase Adjust low end trim
Crestron CLX-1DELV4 Reverse Phase Adjust low end trim
Crestron DIN-1DIM4 Reverse Phase Adjust low end trim
Crestron DIN-1DIMU4 Reverse Phase Adjust low end trim
Crestron CLW-DIMEX-E Reverse Phase
Dimmer requires a direct connection to neu-
tral to ensure operation. Enforce Crestron Min
level not only to avoid icker, but to prevent
initial ashing/disortion when ramping up
the xture output.
Crestron CLW-DIMEX-P Reverse Phase
Crestron CLW-DIMSWEX-E Reverse Phase
Crestron CLW-DIMSWEX-P Reverse Phase
Crestron P-DIMEX Reverse Phase
Crestron GLX-DIM6 Reverse Phase Adjust low end trim
Crestron GLXX-2DIM8 Reverse Phase Adjust low end trim
ETC ELV 1.2KW Paradigm Control Processor Reverse Phase 1.2Kw Adjust low end trim
Leviton Universal-Decora 6674P Forward Phase 600W Adjust low end trim
Leviton Universal-Decora IPL06 Forward Phase 600W Adjust low end trim
Leviton-Rotary Dial 6304 Forward Phase 300W Lamp Base dimmer
Leviton 6633-P Forward Phase 600W
Leviton 6681 Forward Phase 600W
Leviton IPIO6 Forward Phase 600W
Leviton 6613-P Forward Phase 600W
Leviton 6631-LW Forward Phase 600W
Leviton 6161-I Forward Phase 500W
Leviton RPIO6-1 Forward Phase 600W
Leviton IPE04-1LZ Reverse Phase 400W
Lutron TG-603P Forward Phase 600W
Lutron TG-600P Forward Phase 600W
Lutron AY-103P
Forward Phase 1000W
Lutron C-L wall mount Dimmers Forward Phase 600W Adjust low end trim
Lutron Maestro CL MACL-153M Forward Phase 600W Adjust low end trim
Lutron Diva CL DVCL-153PD Forward Phase 600W Adjust low end trim
Lutron Skylark CL CTCL-153P Forward Phase 600W Adjust low end trim
Lutron S-600P Forward Phase 600W
Lutron DV-600P Forward Phase 600W
Lutron RadioRA2 RRD-6NA Phase Adaptive 600W Adjust low and high end trim. Set load to FP
Lutron HomeWorks QS HQRD-6NA Neutral Adaptive 600W Adjust low and high end trim. Set load to FP
Lutron Graphic Eye QS PHPM-PA Reverse Phase 1920W Adjust low and high end trim. 10W min load
Lutron Graphic Eye QS PHPM-WBX 3 wire uorescent Reverse Phase 1920W Adjust low and high end trim.
Lutron Graphic Eye QS Main unit family Forward Phase
Neptun Apollo 80005 Forward Phase 600W
Note: Most Forward-phase dimmers have a
minimum load requirement of 40-60 watts. A single
12.5W LED lamp on a 600W dimmer may icker if
the minimum load requirement is not met; consider
a synthetic minimum load, LUTRON-LBX or other
equivalent. This requires a 2-gang wall box and
additional wiring to the dimmer.
Depending on the quantity of LED lamps on the dim-
ming circuit, an approximate 10% to 100% dimming
range may be obtainable. Most available dimmers
were designed around older technology and resistive
or incandescent lamp loads; therefore, performance
can vary with LED load and is not guaranteed. Please
see the manufacturer’s instructions on dimmers for
use with LED lamps and do not exceed the 150W LED
load for 600W rated dimmer.
Lamp Model Wattage Operating Amps Approx. Quantity
ALEBR30 850L DIM 12.5W 0.098 163
Acculamp LED–20 Amp Circuit Load
Use the table below as a guide, for the approximate quantity of Acculamp LED lamps on a typical standard 20 amp circuit (derated to 80% - 16 amps). Use a licensed
electrician to determine proper wire gauges and circuit breakers according to the National Electrical Code and local codes. Do not overload circuit with more lamps
than the approximate quantity shown below for a typical standard 20 amp circuit breaker for approximately 7X multiple of inrush current. Circuit breakers with
higher inrush trip curve characteristics such as High Magnetic types are available. Consult with a licensed electrician for proper determination.