Installation Guide

ManualsBrandsLithonia Lighting ManualsOtherLinkable 4 ft. White LED Strip Light

INSTALLATION INSTRUCTIONS

MNLK LED Linkable Strip

*Model number noted on carton label

TOOLS REQUIRED

FOR INSTALLATION

• Safety glasses

• Drill with 1/16” drill bit

• Phillips screwdriver

• Pencil

• Hammer

• Pliers

• Ruler

• Wire Strippers

OUTILS REQUIS POUR L’INSTALLA-

TION

• Lunettes de sécurité

• Perceuse, avec un foret de 1/16 po

• Tournevis à tête Phillips

• Crayon

• Marteau

• Pinces

• Régle

HERRAMIENTAS NECESSARIAS PARA

LA INSTALACIÓN

• Lentes de seguridad

• Taladro con broca de 1/16”

• Destornillador de Phillips

• Làpiz

• Martillo

• Pinzas

• Regla

• Pelacables

U219578T 05/15 Rev B

Protect yourself. Before installing,

read these instructions carefully and

save them for future reference.

Date Installed:________________

Pour votre propre protection. Avant de procéder à

l’installation, veuillez lire attentivement ces directives

et les conserver pour référence ultérieure.

Date de l’installation :________________

Protéjase. Antes de instalar, lea estas

instrucciones cuidadosamente

y guárdelas para futura referencia.

Fecha Instalada:________________

Accessory Items

18” Linking Cord

(MNLK LINKABLE CORD WH)

5’ Power Cord

(MNLK 5FT POWERCORD WH)

J-box Cover

(MNLK JBOX)

12” LED Strip

MNLK 12

actual length: 12-1/8” (30.8cm)

24” LED Strip

MNLK 24

actual length: 22-3/4” (57.8cm)

48” LED Strip

MNLK 48

actual length: 46-3/8” (117.8cm)

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS MNLK LED Linkable Strip *Model number noted on carton label 12” LED Strip MNLK 12 actual length: 12-1/8” (30.8cm) 24” LED Strip MNLK 24 actual length: 22-3/4” (57.8cm) 48” LED Strip MNLK 48 actual length: 46-3/8” (117.8cm) Accessory Items 5’ Power Cord (MNLK 5FT POWERCORD WH) 18” Linking Cord (MNLK LINKABLE CORD WH) Protect yourself. Before installing, read these instructions carefully and save them for future reference. Date Installed:________________ Protéjase.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS INFORMACIÓN IMPORTANTE DE SEGURIDAD IMPORTANTES MESURES DE SÉCURITÉ • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/ abrasions, and other hazards read all warnings and instructions included with and on the the fixture box and all fixture labels. • Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
PAGE 3
4 2 8 7 3 1 5 10 11 6 9 LISTE DES PIECES FIXTURE PACKING LIST LISTA DE EMBALAJE Description Quantity 1) Housing Assembly ........................... 1 2) LED Cover assembly ......................... 1 3) LED Driver ........................................ 1 4) Wire Connectors ............................... 3 5) Rocker Switch.................................... 1 6) “Keyed” connector port ...................... 1 7) Standard connector port .................... 1 8) Push-in wire connector .....
PAGE 4
PREPARING THE FIXTURE FOR INSTALLATION Remove fixture components and parts pack(s). Check that all parts are included. See Page 3. Note: A single unit or the first unit in a chain is capable of being direct-wired to incoming power or use the optional power-cord to supply power. You will need to determine which method prior to installing the product. If multiple units are to linked together (max. 345 Watts), the suppliled row connector or the optional linking cords will be required.
PAGE 5
PREPARÁNDOSE PARA LA INSTALACIÓN Saque los componentes del luminario y paquete(s) de piezas. Compruebe que todas las piezas estén incluidas. Vea página 3 PRÉPARATION DE L’APPAREIL POUR L’INSTALLATION Retirer les composantes de l’appareil et tout emballage de pièces. S’assurer que toutes les pièces sont incluses.
PAGE 6
12. Once the first fixture is mounted, you can install the next fixture in the chain. On the end(s) of fixture to be connected- remove plug cover- See Fig 5. Note: Fixture orientation is important- make sure all of the linked fixtures are oriented the same way. The linking cord must connect to a Keyed port on one fixture and a non-keyed port on the other fixture. 13. Mount remaining fixture(s) as stated in the previous steps with included Row Connector (11) or optional 18” Linking Cord.
PAGE 7
12. Una vez que el primer luminaria está montado, usted puede instalar el siguiente en el circuito.En los extremos del montaje que se conectará: quite la cubierta del enchufe, Vea fig 5. Nota: La orientación del montaje es importante: asegúrese de que todos los montajes conectados estén orientados de la misma forma. El cable de unión debe conectarse a un puerto con chaveta en un montaje y a un puerto sin chaveta en el otro montaje. 13.
PAGE 8
Note: Fixture orientation is important- make sure all of the linked fixtures are oriented the same way. The linking cord must connect to a Keyed port on one fixture and a non-keyed port on the other fixture. 9 . Mount remaining fixture(s) as stated in the previous steps with included Row Connector or optional 18” Linking Cord. Note: If Linking fixtures with included Row Connector (11), insert connector into previoulsy installed fixture and connect next fixture to connector.